attsetech
join:2008-09-04
Panama City, FL
| reply to Sasba858
Re: Taking the step to change internet providers, and need help.
you can go online and set-up your username and password now, but until att dsg dept. provisions the line it will not work,unless you can get somone to up that date they gave you ... that is when it will provision :::::::the site for username and password is dslinstallation.bellsouth.net no cd needed no dsl filter needed with (naked dsl) |
|
Sasba858
join:2008-08-28
Pearl River, LA
| Thank you attsetech for you reply.
Does anyone know how I would get the FastAccess DSL Direct to operate without dropping Charter first, as it is hooked up to my current modem?
Also, how long does it normally take for AT&T/Bell South dsg dept. to provision the line? |
|
wayjac
Premium,MVM
join:2001-12-22
Indy
 ·AT&T Midwest
| said by Sasba858  :Does anyone know how I would get the FastAccess DSL Direct to operate without dropping Charter first, as it is hooked up to my current modem. If you configure the motorola for ip passthrough, you can switch between cable and dsl by changing which modem is connected to the routers wan/internet port.
Is your phone wiring prepared for dsl? |
|
Sasba858
join:2008-08-28
Pearl River, LA | wayjac reply: Is your phone wiring prepared for dsl?
I know the lady that lived here had a AT&T land line phone only. Would that phone wiring be all needed to get FastAcess DSL DIRECT 3.0? |
|
wayjac
Premium,MVM
join:2001-12-22
Indy
·AT&T Midwest
| said by Sasba858 :I know the lady that lived here had a AT&T land line phone only. Would that phone wiring be all needed to get FastAcess DSL DIRECT 3.0? Yes that phone wiring will be enough.
Is there a phone jack in the room where the dsl modem will be? |
|
Sasba858
join:2008-08-28
Pearl River, LA | Yes there is. |
|
wayjac
Premium,MVM
join:2001-12-22
Indy | If the inside wiring is ok just connect the modem and wait for its dsl light to be steady green. |
|
wayjac
Premium,MVM
join:2001-12-22
Indy | reply to Sasba858
You have Vonage for telephone service.... is it setup such that you can use all the phone jacks in the house to make and answer calls? |
|
Sasba858
join:2008-08-28
Pearl River, LA | My Vonage modem is hooked up to my Belkin Router just like my desk top PC. From my Vonage modem telephone port, I have a telephone line going to the base unit of my uniden. All the other hand units hubs just plug in the wall electical outlets. |
|
wayjac
Premium,MVM
join:2001-12-22
Indy
·AT&T Midwest
| said by Sasba858 :From my Vonage modem telephone port, I have a telephone line going to the base unit of my uniden. All the other hand units hubs just plug in the wall electical outlets. That good that you are not using the homes telephone wiring to get dialtone to all hand sets.
One other thing you should check out is the nid and its wiring and test jacks. |
|
