http://www.dslreports.com/forum/r21088236 en Tue, 15 Dec 2009 05:22:40 EDT Tue, 15 Dec 2009 05:22:40 EDT http://www.dslreports.com/forum/remark,21164564 Jimdaboe : Are you sure it's a software or operating system problem. I had a similar problem with a WG111. The real problem was a cold solder connection from the USB connector to the PC board in the 111. When it got warm, and those units do get warm, it would lose connection. I just opened it up and applied hot soldering iron to the solder joints and the problem was solved.]]> http://www.dslreports.com/forum/remark,21164564 Wed, 24 Sep 2008 23:28:22 EDT http://www.dslreports.com/forum/remark,21098021 id09542 : Is this under Vista? I am having the exact same problem on a new Vista build, been pulling my hair out trying to figure out what is happening. I have installed/installed the driver numerous times, tried using native Vista wireless configurator and the Netgear configurator ... exact same problem. This is with a V2 adaptor.]]> http://www.dslreports.com/forum/remark,21098021 Fri, 12 Sep 2008 08:43:27 EDT http://www.dslreports.com/forum/remark,21088236 anon : Hi im having trouble with my wireless adapter. It detects the network and connects to the internet fine but then drops the connection straight away. I can then re-connect but it will keep dropping. Its getting annoying as I can't be on the internet for more than a few seconds. If any one could help I'd really appreciate it, I've tried downloading new software but that didn't work either.]]> http://www.dslreports.com/forum/remark,21088236 Wed, 10 Sep 2008 13:32:50 EDT