said by norwegian :

Thank you for the update.

Gave this version a run and it worked like a treat.

said by norwegian :

I had the same results. Crashed pretty much after it started, but then I've an AMD, not Intel

said by deblin :

I stand corrected, and you were right. I was undervolting the RAM, thinking it was 1.9v for running at 800. Here I was, giving it 1.8v when it's spec'd for 2.0-2.1 (well, for 1000 MHz anyway).

said by Stray Bullet :

You can do 400x8 ;)

said by Stray Bullet :

You can do 400x8 ;)

said by Somnambul33t :

anyone had success with this on Vista64 yet?

said by Stray Bullet :

You can do 400x8 ;)

said by jsimmons :

Interesting. My system was Prime95 stable for hours. Failed IBT within 10 minutes too. Had to back off the FSB a notch or two. That solved it. :D

said by Stray Bullet :

Ender3rd ,
See in your screenshot of core-temp, it says your TJMax is 105c, that is wrong...

Make sure in your real temp settings it says 100c for accurate temps!

said by Intel Corp :

45nm Desktop Dual-Core Processors
Intel Core 2 Duo processor E8000 and E7000 series - 100°C

45 nm Desktop Quad-Core Processors
Intel Core 2 Quad processor Q9000 and Q8000 series - 100°C
Intel Core 2 Extreme processor QX9650 - 95°C
Intel Core 2 Extreme processor QX9770 - 85°C

said by Somnambul33t :

i dont know anything about this Intel burn in test but the end-all stability test (sans GFX card) has been OCCT since the 2.0 beta was released
»www.ocbase.com/perestroika_en/in···Download

said by AgentGOD :

Description:
Linpack by Intel(R) is an extremely stressful program that will
put even the most powerful X86/X64 CPU in the world at its knees. Load temp
under Linpack will be up to 22*C higher than the competing software Prime95.
This program will make usage of Linpack easier and more practical.

Keep in mind, use this program at your own risk. By using this program, you
agree that neither I nor Intel shall be responsible for including, but not
limited to: burned up CPU, fried motherboard, spontaneous room temperature
increase, hair loss, or mental stress.

Benefits of using Linpack:
1. More accurate than Prime95 Small FFTs/Blend.
2. Takes less time to tell if your CPU/RAM is unstable than Prime95 (usually
something like 8 minutes Linpack vs 40 hours under Prime95).
3. Use the same stress-testing engine that Intel uses to test their products
before they are packed and put on shelves for sale.

Benefits of using IntelBurnTest:
1. Simplifies usage of Linpack.
2. Direct output of results to the screen.
3. Simplifies the process of selecting a test size to use.
4. Better appearance.