http://www.dslreports.com/forum/r21115775 en Tue, 15 Dec 2009 05:10:16 EDT Tue, 15 Dec 2009 05:10:16 EDT http://www.dslreports.com/forum/remark,21170764 evilt00l :
Yes it will fax, I have faxed several times with the windows fax program and while it did have to try a few times the faxes were sent successfully.]]> http://www.dslreports.com/forum/remark,21170764 Fri, 26 Sep 2008 01:50:49 EDT http://www.dslreports.com/forum/remark,21125717 syslock : Using Winfax and an older Supra 28.8 External that I have flashed current, to send fax's to Australia and New Zealand no problems.

How many phones do you have hooked to the line your
magicjack is on? Do they all ring when a call comes in?

Check your fax machine and see what REN (Ringer Equivalence Number) is listed for it.

Great site I found that talks about this.
»www.sandman.com/ringvoltbul.html

[The REN number is printed on the bottom of most phones, but newer products
might show the REN number inside the FCC registration number. In the
registration number US:AAAAAnnBXXXXX, nn is the REN times 10. Just think
of it as n.n REN.

If the registration number is US:1X23T07A12345, the REN is 0.7. In the
new style FCC registration number, there are 5 characters after US,
then the 2 digit REN without the decimal point. The letter following
the REN is almost always A, B or Z.

The REN on telephone equipment can be as low as 0.0 REN (it uses
almost no ringing current), or sometimes as high as 2 or
3 REN (usually older equipment).

If the phones don't ring properly, add up the REN numbers on the
bottom of everything plugged into the line, and make sure it's less
than 5. The problem is that if it's not a real phone line, you
probably have no way of knowing how many REN the device puts out.
Some VoIP and cable devices put out 5 REN of ringing, but most
put out less. Unplug the phones, one at a time, until the ringing
starts to work. Few (if any) analog station ports on phone
systems put out 5 REN.]


Not sure how much power the majic jack puts out for ringing.
Would be a nice fact to know for helping others.]]> http://www.dslreports.com/forum/remark,21125717 Wed, 17 Sep 2008 14:44:37 EDT http://www.dslreports.com/forum/remark,21123857 dbmaven : If the receiving machine isn't answering - it's probably got nothing to do with the MagicJack.

Call the receiving machine from a POTS or cell phone. Does it answer? Call again from the MagicJack using a phone (not the sending fax machine - a plain old phone). Does it answer?]]> http://www.dslreports.com/forum/remark,21123857 Wed, 17 Sep 2008 08:53:56 EDT http://www.dslreports.com/forum/remark,21123229 anon : Trying out the magicJack. Have an old Sharp fax machine hooked to it. Successfully receive faxes but have not succeeded in sending them. It appears that the receiving machine does not recognize the call and doesn't even answer. MagicJack tech support says to disable ECM but my machine doesn't have that feature. I'd love to get this to work so I can cancel my landline. Any solutions out there?]]> http://www.dslreports.com/forum/remark,21123229 Wed, 17 Sep 2008 01:45:03 EDT http://www.dslreports.com/forum/remark,21118658 devil_doo : A simple search at this site would have done you wonders

search "fax" = »/nsearch?board···=r&q=fax]]> http://www.dslreports.com/forum/remark,21118658 Tue, 16 Sep 2008 11:46:19 EDT http://www.dslreports.com/forum/remark,21117208 DrStrange : There are people here who've faxed from a MJ, so we know it's possible. I haven't tried it yet.]]> http://www.dslreports.com/forum/remark,21117208 Tue, 16 Sep 2008 01:47:17 EDT http://www.dslreports.com/forum/remark,21116327 anon : You may want to inquire in the Magic Jack forum.

»MagicJack]]> http://www.dslreports.com/forum/remark,21116327 Mon, 15 Sep 2008 22:29:49 EDT http://www.dslreports.com/forum/remark,21115775 anon : I have a product called magic jack it works great however wondering if it is possible to fax with it and if so. how can i do it.
thanks
jill]]> http://www.dslreports.com/forum/remark,21115775 Mon, 15 Sep 2008 21:01:58 EDT