lelik93
join:2008-08-03
| ST516 upgrade 7.4.4.7
I have just upgraded my ST516 to 7.4.4.7
For some reason I have pressed reset button on the modem.
Since that time, I have no access to the modem.
I connected my modem to the computer and it does not see the modem by IP. I tryed different ips. (10.0.0.138, 192.168.1.254).
It's connecting to internet using PPPoE connection from windows xp. and the modem is invisible
What to do? |
|
Ikarasu
join:2004-01-09
Port Coquitlam, BC
 ·ITalkBB
 ·TekSavvy Solutions..
| Sounds like its giving your PC an external IP... mine has the same problem with this version.
Go into your nic settings, and set up a static IP, something in the 192.168.1.xx range, With 192.168.1.254 for the gateway. Then you should be able to access it. (Or use another computer) |
|
lelik93
join:2008-08-03 | Yes, you are right. My comp is receiving external IP.
Even when I set IP 192.168.1.5 to my comp I could not access the modem as 192.168.1.254.
It looks like the modem is in the bridge mode
How to switch it back? Reset button does not help |
|
TilhasBB
Formally Goden99
Premium
join:2000-08-05
canada | reply to lelik93
Try 10.0.0.X in your ip address.
connect directly to modem and reboot both modem and pc. |
|
pcouturier
join:2007-03-14
Saint-Jacques, NB | reply to lelik93
If its the ST516 v6 your IP will be 192.168.1.254, if its only ST516 it will be something like 10.0.0.X. Hold the reset until the power light turns red then keep pressing until it goes back to green. Then your modem should be in bridge by default. |
|
