Bicephale
join:2005-09-24
 ·TekSavvy Solutions..
| Hi Orbmu2k,
'OrbMT' supports my Siemens SpeedStream 4200, my
Thomson SpeedTouch 546 and hence both my ST516
units. My other two MoDems are from GNet: one old
BB0060B and a GBB2060-Xi, both with the "Viking-II"
FirmWare and using either a Viking or Vulcan ChipSet
from GlobeSpan/Virata/Conexant. All of my MoDems
(six) provide Error Rate information and i'm ready to
provide "Debug" logs for those, when Angelo is done!
He! He!
The GNet CLIs appear to be highly compatible, for
all practical pruposes: e.g. the addition of support
for one GNet will most likely translate as support for
many more clones such as VersaTek's VersaXpress
VER170M, etc. I'd be very pleased to contribute!...
-=*=-
The 'stmtlog.txt' file generated by 'STMT' doesn't
include the Error Rate information, i'm not sure it
can be made to record samples at regular intervals
and i'm almost certain there's no option to adjust
the duration of those eventual intervals anyway...
The 'DMT v7.35' log file ('dmtdiag.txt', whatever)
does include the Error Rate information and it can
have its sampling rate set to a high resolution of
fifteen seconds (wow!) but i noticed the records
can be scrambled by random dates in innapropriate
fields, i'm afraid!!! The "noise" curve i've shown in
a previous post was created using the 'DMT v7.35'
"Diagnosis" file, actually; this graph was created
by 'OpenOffice Calc' but i believe that the glitch
at the start of the last segment was caused by one
of those random events which polute 'dmtdiag.txt'.
-=*=-
I understand your situation regarding new devices/
features all too well, my hope was simply that some
of us would give you the feedback you seek... It's
good news enough already to have 'OrbMT' released
in English, 'OrbMT' adds nicely to our arsenal and
the stylish design makes it pleasant to use, not to
mention all of the numbers are found in one small
capture which can be turned into an animated .GIF!
Honestly, my opinion is that the major improvements
which were made lately are worth a congratulation;
personally, i was quite pleased, on top of that, as i
have discovered that 'modemtool.csv' was implicitly
compatible with SoftWare such as 'OpenOffice Calc',
which does turn it into a professional grade trouble-
shooting tool. Speaking of that, here's that sample
where i could observe column shifting earlier today:
Please, consider that i mean this as a constructive
contribution only. It's hard enough to make contact
with authors like you, BoxFan and Amatt these days,
i don't want to be annoying! Euh... But if i may...
Is it possible to obtain a copy of the source-code?
P^) |
%20.GIF/thumb.jpg)
