Re: Linksys spa doesn't work when directly connected to cable Mo

Author	All Replies
boatman9 join:2003-07-28 Portland, OR	reply to stuck Re: Linksys spa doesn't work when directly connected to cable Mo You should power cycle the modem just before connecting the SPA2102. -- OR -- Use the MAC Clone Settings. Use the MAC address from your other device, the one that works OK when connected directly to your cable modem.
boatman9 join:2003-07-28 Portland, OR	to forum · permalink · · 2008-09-22 04:42:19 ·
stuck @comcast.net	Hi Boatman.. tried power cycling, no luck . I will try the MAC addr cloning later today and let you folks know. Any other tips? Mazillo, I agree with your suggestion, but I am trying to check if my modem's QoS sucks as compared to putting spa2102 directly behind the modem. Thanks...
stuck @comcast.net	to forum · permalink · 2008-09-22 15:15:54 ·
boatman9 join:2003-07-28 Portland, OR	said by stuck : Hi Boatman.. tried power cycling, no luck . I will try the MAC addr cloning later today and let you folks know. Any other tips? I know that a cable modem will generally communicate only with the first MAC address connected after power up, so that's why I mentioned the above ideas. I can't think of anything else to try. If your unit wasn't formerly locked I would have suggested a factory reset.
boatman9 join:2003-07-28 Portland, OR	to forum · permalink · · 2008-09-22 15:40:44 ·


Monday, 09-Nov 02:05:48	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com.republican-creole page compression OFF