AnonShawUser
join:2006-06-17
Calgary, AB
| reply to rivalman
Re: Internet through Shaw going through Amp
It -might- mess up the pings, if the amp is having some problems. What I'd suggest is you call in in a few days or so, and ask Shaw to check the levels on the modem. It could be that the levels were too low as it was and the amp is required to get the levels into acceptable ranges.
You could also try running pings for extended times while not running anything else, just to test your latency. Pick a target that you get good pings to, then set it up as a -t switch and watch it for a few minutes. |
