Jim_in_VA
join:2004-07-11
Cobbs Creek, VA
 ·Sprint Mobile Broa..
·Millenicom
edit:
October 5th, @04:56PM
| Are you using the latest Cradlepoint firmware (2.2.1)? Also via Cradlepoint:
By default, both the Mogul and router come up with an IP address of 192.168.0.1. You will
need to change one or the other to a different subnet (such as 192.168.10.1). This change is easy
to make at the router under the Basic -> LAN settings. To ready the Mogul do not plug it into
the router yet. On the Mogul’s UI, go to Start -> Programs -> Internet Sharing. Select Connect
and the Mogul will request you plug in the USB cable. Then plug it into the router. After a
short wait, the Mogul should change to “Connected” and the USB light on the router should turn
on.
For the Mogul, current firmware 2.17.651, 2.09.651.3, and 3.35.651.2 are the only supported
versions. Beta/Prereleased/Modified firmware is untested and unsupported. Older Mogul
firmware has an issue when disconnecting it from the router, the handset will stay “Connected”
on its status page until the handset has been rebooted. This is fixed in the 3.35.651.2 firmware.
--
... need help? »evdo-tips.com/ |
