| SMC 8013 - Cisco Router Config Hello,
I have a SMC8013 connected to Cisco router 871 but I am not able to get an IP address on my WAN port.
Here is my config :
conf t
hostname achanger
no ip domain lookup
ip ssh version 1
interface FastEthernet4
no shut
ip address dhcp
no ip redirects
no ip unreachables
ip nat outside
ip virtual-reassembly
no ip route-cache cef
no ip route-cache
no ip mroute-cache
no cdp enable
ip route 0.0.0.0 0.0.0.0 dhcp
ip sla 10
icmp-echo aaa.bbb.ccc.ddd source-interface FastEthernet4
frequency 45
ip sla schedule 10 life forever start-time now
line con 0
login local
privilege level 15
no modem enable
stopbits 1
line aux 0
line vty 0 4
session-timeout 15
login local
privilege level 15
transport input telnet ssh
end
Thanks for your help,
Mehdi |
|
|
|
 inmuckIdiot In The EastPremium,MVM
join:2003-01-29
Raleigh, NC | The config seems to be right (at least I think so)
I would recommend the old fashioned way, connect the Modem directly to the computer and check if you can go online, then the Cisco Router. |
|
| Thanks for your answer.
Yes, that is what I tried to do. I actually did not get any IP address even on my laptop.
I am still waiting for ISP to answer why the line is not active!!!
Thanks again,
Mehdi |
|
