http://www.dslreports.com/forum/SMC-8013-Cisco-Router-Config-21222428 en Sat, 11 Feb 2012 04:33:53 EDT Sat, 11 Feb 2012 04:33:53 EDT http://www.dslreports.com/forum/Re-SMC-8013-Cisco-Router-Config-21224177 Yes, that is what I tried to do. I actually did not get any IP address even on my laptop.
I am still waiting for ISP to answer why the line is not active!!!

Thanks again,
Mehdi]]> http://www.dslreports.com/forum/Re-SMC-8013-Cisco-Router-Config-21224177 Mon, 06 Oct 2008 16:09:46 EDT http://www.dslreports.com/forum/Re-SMC-8013-Cisco-Router-Config-21222549
I would recommend the old fashioned way, connect the Modem directly to the computer and check if you can go online, then the Cisco Router.]]> http://www.dslreports.com/forum/Re-SMC-8013-Cisco-Router-Config-21222549 Mon, 06 Oct 2008 11:22:49 EDT http://www.dslreports.com/forum/SMC-8013-Cisco-Router-Config-21222428 I have a SMC8013 connected to Cisco router 871 but I am not able to get an IP address on my WAN port.
Here is my config :

conf t

hostname achanger
no ip domain lookup
ip ssh version 1

interface FastEthernet4
no shut
ip address dhcp
no ip redirects
no ip unreachables
ip nat outside
ip virtual-reassembly
no ip route-cache cef
no ip route-cache
no ip mroute-cache
no cdp enable

ip route 0.0.0.0 0.0.0.0 dhcp

ip sla 10
icmp-echo aaa.bbb.ccc.ddd source-interface FastEthernet4
frequency 45
ip sla schedule 10 life forever start-time now
line con 0
login local
privilege level 15
no modem enable
stopbits 1
line aux 0
line vty 0 4
session-timeout 15
login local
privilege level 15
transport input telnet ssh

end

Thanks for your help,
Mehdi]]> http://www.dslreports.com/forum/SMC-8013-Cisco-Router-Config-21222428 Mon, 06 Oct 2008 11:05:09 EDT