Bicephale
join:2005-09-24
 ·TekSavvy Solutions..
| Re: Force ST516 to ADSL2+ only Hi,
I don't have a SpeedTouch on-line but since you
got 'DMT' working it will be easy enough. TelNet
to speedtouch.lan using 'Hyper-Terminal' or the
basic console-mode TelNet client included with
MicroSoft 'Windows' then enter the user-defined
UserName/PassWord (if you defined them before)
and enter "menu"... This provides an interactive
text-mode interface which makes configuration
much more intuitive. The key-work to start with
should be "adsl", i presume, and the whole CLI
command probably looks something like this:
adsl config xdsltype=adsl
Syntax may differ according to FirmWare version.
You must type these CLI commands when done:
saveall
system reboot
This is necessary to apply your modifications... |
