Angelo_
The Network Guy
Premium
join:2002-06-18 | reply to Bicephale
Re: Force ST516 to ADSL2+ only
its really simple on the 516.. Bicephale has you in the right direct.. just pick up the 516 cli pdf |
|
Bicephale
join:2005-09-24 | reply to Bicephale
Ha, and the interactive menu offers options to browse thru. |
|
Bicephale
join:2005-09-24
 ·TekSavvy Solutions..
| reply to wonders
Hi,
I don't have a SpeedTouch on-line but since you
got 'DMT' working it will be easy enough. TelNet
to speedtouch.lan using 'Hyper-Terminal' or the
basic console-mode TelNet client included with
MicroSoft 'Windows' then enter the user-defined
UserName/PassWord (if you defined them before)
and enter "menu"... This provides an interactive
text-mode interface which makes configuration
much more intuitive. The key-work to start with
should be "adsl", i presume, and the whole CLI
command probably looks something like this:
adsl config xdsltype=adsl
Syntax may differ according to FirmWare version.
You must type these CLI commands when done:
saveall
system reboot
This is necessary to apply your modifications... |
|
wonders
join:2007-08-21
Canada | Anyone know how to force the ST516 to try and get an ADSL2+ sync profile only?
All the options I see in DMT have some sort of fallback to ADSLv1 if no sync is achieved at ADSL2+.
I'm just simply experimenting. |
|
