http://www.dslreports.com/forum/r21236881 en Sun, 29 Nov 2009 02:41:46 EDT Sun, 29 Nov 2009 02:41:46 EDT http://www.dslreports.com/forum/remark,21244261 Angelo_ : its really simple on the 516.. Bicephale has you in the right direct.. just pick up the 516 cli pdf]]> http://www.dslreports.com/forum/remark,21244261 Fri, 10 Oct 2008 02:46:52 EDT http://www.dslreports.com/forum/remark,21237045 Bicephale : Ha, and the interactive menu offers options to browse thru.]]> http://www.dslreports.com/forum/remark,21237045 Wed, 08 Oct 2008 20:17:07 EDT http://www.dslreports.com/forum/remark,21237041 Bicephale : Hi,

I don't have a SpeedTouch on-line but since you
got 'DMT' working it will be easy enough. TelNet
to speedtouch.lan using 'Hyper-Terminal' or the
basic console-mode TelNet client included with
MicroSoft 'Windows' then enter the user-defined
UserName/PassWord (if you defined them before)
and enter "menu"... This provides an interactive
text-mode interface which makes configuration
much more intuitive. The key-work to start with
should be "adsl", i presume, and the whole CLI
command probably looks something like this:

adsl config xdsltype=adsl

Syntax may differ according to FirmWare version.

You must type these CLI commands when done:

saveall
system reboot

This is necessary to apply your modifications...]]> http://www.dslreports.com/forum/remark,21237041 Wed, 08 Oct 2008 20:16:13 EDT http://www.dslreports.com/forum/remark,21236881 wonders : Anyone know how to force the ST516 to try and get an ADSL2+ sync profile only?

All the options I see in DMT have some sort of fallback to ADSLv1 if no sync is achieved at ADSL2+.

I'm just simply experimenting.]]> http://www.dslreports.com/forum/remark,21236881 Wed, 08 Oct 2008 19:44:44 EDT