saberX
join:2007-12-18
Toronto, ON | reply to R0CKY
Re: Oish...
what details do u need? |
|
R0CKY
TSI Rocky
Premium,VIP
join:2005-05-19
Chatham, ON
| said by saberX  :what details do u need? The account details.... name/number.. |
|
saberX
join:2007-12-18
Toronto, ON | pm'ed earlier |
|
R0CKY
TSI Rocky
Premium,VIP
join:2005-05-19
Chatham, ON | hmm.... never got anything.... |
|
saberX
join:2007-12-18
Toronto, ON | sent again, this time Instant msg. Last was email (maybe u have ur email set wrong or something). |
|
TSI Rick
TSI Rick
Premium,VIP
join:2007-02-17
Merlin, ON
| There were some problems with the upload that were corrected. The problem is speed is not guranteed.
Here are your current line stats:
Line Status: In Service UpTime:
Line Profile: d6016/u800 on Interleaved Last State Change: Thu Oct 16 09:46:21 EDT 2008
Operational Status Speed (Kbs) Relative Capacity Occupation (%) Noise Margin (0..31 dB) Signal Power (0..20 dBm) Attenuation (0..60 dB) Block count
UpStream 800 78 5.0 12.0 6.0 1.2540932E8
DownStream 6016 51 20.0 10.0 15.0 2.14748365E9
Looks like Bell put you on a 6meg connection. Now as for the upload, you also need to take into effect the ~18% overhead that PPPoE causes. That would put the maximum at ~82KB(kilobytes/sec) also take into effect everyhing interal, process speed/minor loss between PC and modem and/or router and between 70-80KB/s is approximately where you should be. There is no 100% way to be exactly the same speed every single time you upload a file.
Regards,
Rick
--
TSI Rick - TekSavvy Solutions Inc.
Authorized TSI employee ( »TekSavvy FAQ »Official support in the forum ) |
|
