 CMack
join:2004-07-30
canada | Multimode RF Transmitter question Can anyone tell me if there is any such thing as a Multimode RF transmitter/receiver?
Our RF Plant goes by a customer who has plowed in 1km of multimode fibre to his business, we need to get him service somehow. It needs to do both RF and Data.
CMack |
|
|
|
 DaMaGeINCThe Lan ManPremium
join:2002-06-08
Greenville, SC
kudos:2 | You could always get a Ethernet to Fiber tranciever and attach an access point to it. |
|
 CorvusFlaming Tards Since 2003Premium,VIP
join:2003-11-26 | reply to CMack
I don't get it... You want to feed this customer with the full RF band sent to nodes but using a multimode fiber?
--
Conservatives define themselves in terms of what they oppose.
---George Will |
|
| reply to CMack
WOW.... that's nuts.. you would need a conditioning cable to bring up that fiber and I would NOT use that PoJ device. I would actually recommend purchasing 2 switches, one on each end for troubleshooting the fiber as that PoJ won't do anything other than cause you pain in the Eye, ear, and Arse! |
|
 cob_1310nm Of GoodnessPremium
join:2003-07-08
Tulsa, OK | reply to CMack
Optical RF, huh? |
|
batsonaMaryland
join:2004-04-17
Ellicott City, MD | reply to CMack
BlackBox has tons of different devices to put RS232 etc etc over fiber. A regular transiever shown by DaMaGeINC is good for the data, but you said 'RF'.. We might need more info about this "RF". Describe it as it relates to the OSI model...? |
|
| reply to CMack
I could build a low cost unit from near DC-1Gig pretty easily if the RF specs are not too stringent.
I doubt you will find a commercial one.
Please send an email if interested.
Rick |
|
 SplitpairPremium
join:2000-07-29
Cow Towne
kudos:3 | reply to cob_
said by cob_:Optical RF, huh? Yup as in the Marconi Deep Fiber platform which ran analog CATV over fiber to the ONU's.
RF-fiber-RF
Wayne
--
If you cannot fix it with a buttset and some beanies you ain't a technician.
|
|
SplitpairPremium
join:2000-07-29
Cow Towne
kudos:3
1 edit | reply to batsona
said by batsona: Describe it as it relates to the OSI model...? RF over fiber does not use the OSI or layered model.
Wayne
--
If you cannot fix it with a buttset and some beanies you ain't a technician.
|
|
SplitpairPremium
join:2000-07-29
Cow Towne
kudos:3 | reply to CMack
said by CMack:It needs to do both RF and Data. CMack While it is well out of production you might want to do some research into the Marconi Deep Fiber platform aka. IFITL as that would work for your application.
I also believe Alcatel has a product that will work as well.
Might even be able to find some on the surplus market dirt cheap.
Wayne
--
If you cannot fix it with a buttset and some beanies you ain't a technician.
|
|
cob_1310nm Of GoodnessPremium
join:2003-07-08
Tulsa, OK | reply to CMack
In that case it sounds like the solution is just a modulation system like Wayne mentioned, as long as it will carry all the frequencies you need. I don't think data is a concern as it's just another freq on the coax, right? |
|
