Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Up and Running » Networking » WD My Book World Edition 1TB loses network connection?
Search Topic:
Uniqs:
2905
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
CRC Errors on Trunk »
« [Other] 10Mbps devices - obsolete?  
AuthorAll Replies
-

fox7

join:2001-02-12
Culver City, CA
reply to IcedTeas
Re: WD My Book World Edition 1TB loses network connection?

IcedTeas:
Sorry!! I just assumed that router had that feature. It is a good router, but apparently it does not offer that feature. I have just finished looking at the manual.

Sorry.

fox7

IcedTeas

join:2002-09-22
Owasso, OK
reply to fox7
I looked through all the menus on the router and the only thing I saw about the MAC address was something called 'MAC Address Clone'

fox7

join:2001-02-12
Culver City, CA
reply to IcedTeas
IcedTeas:
Go in to you router and use the MAC to assign a static IP to it within the router.

fox7

IcedTeas

join:2002-09-22
Owasso, OK

reply to fox7
I found the MAC address on the back of the drive but I am not quite sure I follow you on using the MAC address. I know you can go into the drive setup and assign a static IP.

I did try making the workgroup name the same as the 2 computers in the network but no success.

fox7

join:2001-02-12
Culver City, CA
reply to IcedTeas
IcedTeas:
Just for an experiment of something to try. Use the MAC address off the drive device an assign a static IP in your router's range/scope and see if it will remain visible across the network then.

fox7

IcedTeas

join:2002-09-22
Owasso, OK
reply to stevennb
I don't have another router to try


stevennb
Ok, But, Thats The Last Straw.
Premium
join:2001-05-08
Wayne, NJ
reply to IcedTeas
If you returned the original drive to WD...and they sent you a new one (and it's doing the same thing), why not try a different router?


Dogg
Premium
join:2003-06-11
Belleville, IL
·Charter Pipeline

reply to IcedTeas
Doesn't seem to make any difference on that drive, at least from your description. For PC's, if you have the wrong group/domain, you can't see/access the PC. But since you have access to the drive, and then it stops/fails, something else is likely the cause. But it won't hurt to change for your peace of mind.

My first guess would be a failing drive.
--
Google is your Friend

IcedTeas

join:2002-09-22
Owasso, OK
reply to Dogg
How important is the workgroup name? The workgroup name on the network drive is different than that of my desktop and laptop (They both match).


Dogg
Premium
join:2003-06-11
Belleville, IL
·Charter Pipeline

reply to IcedTeas
There are a few things you can check, but most likely, there is some issue with drive.

If you login to the router, you can check to see if the drive has an IP assigned. Assuming it still does, you can try to ping it and see if it is responding. To ping, simply open a command prompt window and type "ping xxx.xxx.xxx.xxx" (without the quotes - xxx's being the IP address listed in the router). This will confirm network connectivity to the device.
--
Google is your Friend

IcedTeas

join:2002-09-22
Owasso, OK

  I bought a WD My Book World 1TB network storage drive just over a month ago. I opted NOT TO INSTALL Mionet but just to use the Shared Storage Manager.

After several hours on the network if you try and access the WD Network drive I get an error saying the following:

Microsoft Windows Network : Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.

The only way I can get the network to see the drive again is to physically disconnet the power from the back of the WD Network drive.

After several days of contact with WD Support they said they network drive was bad and that I return it. Which I did and the new that I just got this past week still does the same thing.

I also have an HP Officejet that is on the network and I don't have any problems with it.

So I'm not sure if it is a setting issue or something.

I have a Linksys WRT54GL router Ver. 1. I haven't upgraded the firmware on either one. THe information on the router firmware doesn't sound like it will fix the problem. The WD Network drive has new firmware but I can't find what it fixes.

I am fairly new to home networks so I am not sure if I am just missing something.

Any help will be greatly appreciated.

Carl
Forums » Up and Running » NetworkingCRC Errors on Trunk »
« [Other] 10Mbps devices - obsolete?  


Friday, 04-Dec 01:16:09 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [162] Comcast Releasing Promised Usage Meter
· [140] Avast Antivirus Has Gone Mad
· [104] Graduate Student Unveils Sprint's GPS Sharing With Feds
· [98] Comcast Makes NBC Universal Acquisition Official
· [82] Google Invades ISP, OpenDNS Turf With Google Public DNS
· [81] Latest Consumer Reports Survey Not Kind To AT&T
· [70] Baltimore To Ban Lazy Cable Installs
· [64] Broadband Killed The Game Console
· [64] Sprint Defuses GPS Privacy Media Bomb
· [55] Rogers Unveils The ISP Dream Model
Most people now reading
· False positive in Avast! or is it real? [Security]
· [Rant] Disrespect of PTO [Rants, Raves, and Praise]
· Maximizing Rogue DPS for ToC/ToGC (3.x) [World of Warcraft]
· Heating - my dad gave me this advice... [Home Repair & Improvement]
· [Business] how to bridge a smc 8014 business class modem [Comcast HSI]
· Windows 7 boot manager editing questions [Microsoft Help]
· What the heck is going on in SoCal - Part 3 [Road Runner]
· Connecting to Google Voice Via SIP [VOIP Tech Chat]
· [TWC] Audio/Video outage in Brooklyn [Time Warner Cable TV/Voice]
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]