Bonded lines... in TekSavvy http://www.dslreports.com/forum/r21443637 en Wed, 09 Dec 2009 07:24:18 EDT Wed, 09 Dec 2009 07:24:18 EDT Re: Bonded lines... http://www.dslreports.com/forum/remark,21454378 Inssomniak : I have you all beat.

3 Biz 6mb lines, all dry loops, all with a crazy dry loop fee (band f)

59.00+16.20*3

225 bux, plus tax!]]> http://www.dslreports.com/forum/remark,21454378 Wed, 19 Nov 2008 21:04:57 EDT Re: Bonded lines... http://www.dslreports.com/forum/remark,21453015 vitesse : currently it cost me 69$ for my mlppp setup (last month invoice) I have to premium account and 1 dry loop]]> http://www.dslreports.com/forum/remark,21453015 Wed, 19 Nov 2008 16:38:23 EDT Re: Bonded lines... http://www.dslreports.com/forum/remark,21452889 blue13130 : Thanks for the help HiVolt and ultracat.

I just have one more question about the 2nd line wall jack. The electrical and wiring entry point to my home is in the front of the house. My office where my computer and router and modem is located in the back of the house. The basement of my house is fully finished and I am curious to see if anyone has ideas as to how the techs can install the 2nd line wall jack in my office. I assume they will need to somehow run a wire from the electrical entry point to the office and how is that done with a drywalled ceiling in the basement?

Thanks for the help in answering my questions. ]]> http://www.dslreports.com/forum/remark,21452889 Wed, 19 Nov 2008 16:09:34 EDT Re: Bonded lines... http://www.dslreports.com/forum/remark,21451567 ultracat :
said by blue13130 See Profile :

Just curious about how much people have paid to get a second line installed in their house and setup to run MLPPP.

Also what is the total monthly cost of have a 2 link MLPPP setup?

Thanks.
I just did this two weeks ago. I had to buy a WRT54GL router for $46.99 from Direct Canada, and a 2nd ADSL modem for $78 (you may be able to find a cheaper modem). The line setup cost is $19.99 to TSI (that covers Bell coming to hook up the line). If your home has relatively new wiring you can hook up the wall jack very easily yourself for free. Otherwise, the tech may do your wall jack for you for free if you're lucky. If you need to contract out for the wall jack installation it's about $120 I hear. Then you just pay TSI for your second line: $29.99 plus dry loop band fee (most likely $7.25/month) for premium 200GB cap or $39.99 plus dry loop band fee for unlimited. After it's setup you can call and ask them to combine your bills / lines so you just get 1 bill every month and you bandwidth cap (if any) is combined. ]]> http://www.dslreports.com/forum/remark,21451567 Wed, 19 Nov 2008 12:04:02 EDT Re: Bonded lines... http://www.dslreports.com/forum/remark,21449286 HiVolt :
said by blue13130 See Profile :

Just curious about how much people have paid to get a second line installed in their house and setup to run MLPPP.

Also what is the total monthly cost of have a 2 link MLPPP setup?

Thanks.
Well, the typical cost of a second line is $30/month for the DSL, and then the band rate fee, because most households do not have two active analog land lines. Band rate is basically a maintenance fee paid to Bell to use the copper line for DSL, if there is no phone service on it... Typical band rate for most users in urban areas is $7-10.
--
GO LEAFS GO!]]> http://www.dslreports.com/forum/remark,21449286 Tue, 18 Nov 2008 22:14:31 EDT Re: Bonded lines... http://www.dslreports.com/forum/remark,21449189 blue13130 : Just curious about how much people have paid to get a second line installed in their house and setup to run MLPPP.

Also what is the total monthly cost of have a 2 link MLPPP setup?

Thanks.]]> http://www.dslreports.com/forum/remark,21449189 Tue, 18 Nov 2008 21:54:00 EDT Re: Bonded lines... http://www.dslreports.com/forum/remark,21444853 Calisto : I kind of figured as much. Didn't mean to turn this into Romper Room :p Thanks to everyone who replied. Appreciate the input.]]> http://www.dslreports.com/forum/remark,21444853 Tue, 18 Nov 2008 07:49:00 EDT Re: Bonded lines... http://www.dslreports.com/forum/remark,21443704 vitesse : 1 copper line can give you 8mbps with 1050 khz of frequency bandwidth, this is the physical limit of one line. you can have faster speed with adsl2+ or vdsl, ADSL2+ use 2200 khz of frequency bandwidth so this is in part why this is faster.

when you bound two adsl 1 line it's like you have 2100 khz of bandwidth to use. You go twice as fast because you have twice the frequency bandwidth available and not because you use two loggin or connection.

--
Connection: Teksavvy 12000/1600 2 line in mlppp - premium
www.Globaltuners.com Remotely controled Radio scanner
]]> http://www.dslreports.com/forum/remark,21443704 Mon, 17 Nov 2008 22:11:15 EDT Re: Bonded lines... http://www.dslreports.com/forum/remark,21443701 Radar73 :
said by ruserious :

said by Radar73 See Profile :

Two physical lines are required for MLPPP, two modems too.
You do not need two lines to use MLPPP. You don't even need a router, you can run it in XP with checking use multiple link or some crap. you only need two lines if you want to BOND two lines..
Since the question is about BONDED LINES, two or more physical lines are required. It's hard to bond one line to nothing.

I should have phrased it better in my response, but I was responding to the question asked about bonding lines. MLPPP works in single link or multiple links, but to bond using MLPPP you need physical lines for each link.]]> http://www.dslreports.com/forum/remark,21443701 Mon, 17 Nov 2008 22:10:32 EDT Re: Bonded lines... http://www.dslreports.com/forum/remark,21443663 anon :
said by Radar73 See Profile :

Two physical lines are required for MLPPP, two modems too.
You do not need two lines to use MLPPP. You don't even need a router, you can run it in XP with checking use multiple link or some crap. you only need two lines if you want to BOND two lines.. ]]> http://www.dslreports.com/forum/remark,21443663 Mon, 17 Nov 2008 22:05:09 EDT Re: Bonded lines... http://www.dslreports.com/forum/remark,21443652 Radar73 : Two physical lines are required for MLPPP, two modems too.]]> http://www.dslreports.com/forum/remark,21443652 Mon, 17 Nov 2008 22:03:57 EDT Re: Bonded lines... http://www.dslreports.com/forum/remark,21443648 anon : Nope, if you want to bond two lines, you NEED TWO LINES to bond.]]> http://www.dslreports.com/forum/remark,21443648 Mon, 17 Nov 2008 22:03:25 EDT Bonded lines... http://www.dslreports.com/forum/remark,21443637 Calisto : ...Do these lines have to actually be physical? Would just a secondary login (different ip, etc.) suffice?]]> http://www.dslreports.com/forum/remark,21443637 Mon, 17 Nov 2008 22:01:11 EDT