| reply to payman
Re: [Packet8] Setting up a BPG510 on Router w/ Tomato Firmware said by payman:If there is an unreliable component in my setup which requires reboots every now and then, it's the BPG510. The unreliable component could be the WHR-HP-G54 firmware. If the the WHR-HP-G54 failed to keep a NAT session open then inbound SIP packets would not reach the BPG510, consequently you would not receive inbound calls during that time. |
|
payman
join:2000-11-04
Bellevue, WA | said by boatman9:The unreliable component could be the WHR-HP-G54 firmware. If the the WHR-HP-G54 failed to keep a NAT session open then inbound SIP packets would not reach the BPG510, consequently you would not receive inbound calls during that time. This is true and I agree. However as best as I've been able to determine, the router keeps NAT sessions open for very long times (days) with no problems whatsoever. For example I've never seen a disconnected message from a SSH terminal which is open 24/7, and even when I am not receiving incoming calls, I can access the Internet fine (web/SSH/...). There is no need to reboot the router; only to reboot the adapter. |
|
|
|
