rwhubert
Bipolar Athlon
Premium
join:2002-07-26
Atlanta, GA
 ·CYBERONIC INTERNET..
1 edit | reply to rwhubert
Re: Speed sucks
I know my ISP is Cyberonic but I need to know if the connection is bad on my end.
Line Mode G.dmt Line State Show Time
DS Speed 2016 Kbps US Speed 768 Kbps
DS Latency Interleave US Latency Interleave
Trellis Coding Enabled Loss of Signal 0
Line Attenuation 26.5 dB Loss of Frame 0
Noise Margin 34 dB CRC Error 0
Line Up Count 1 Error Second 0 seconds
Line Up Time 0:00:50:32 System Up Time 0:00:50:59 |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| reply to rwhubert
said by rwhubert  :34db ISP is Cyberonic.com It is not supposed to be in safe mode and was operating okay till recently. All of your Stats including the Sync Rate, Attenuation, and the SNR on the Downstream and Upstream.
Your ISP Support is here »Cyberonic as Covad is not your ISP.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
rwhubert
Bipolar Athlon
Premium
join:2002-07-26
Atlanta, GA | reply to rwhubert
34db
ISP is Cyberonic.com
It is not supposed to be in safe mode and was operating okay till recently. |
|
LBDSL
Lightning Bolt
VIP
join:2002-01-07
Auburn Hills, MI
| reply to rwhubert
You are in safe mode, under the 3.0/768 profile.
What are your noise margins? (Listed in the same area your sync rates are)
Who is your ISP? Covad.net, or a Covad Partner ISP?
Your Circuit ID should be available from your ISP
--
Lightning Bolt Technologies |
|
rwhubert
Bipolar Athlon
Premium
join:2002-07-26
Atlanta, GA | reply to Doctor Olds
The router control panel says 2016 / 768. One third what it ought to be. |
|
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs: | reply to rwhubert
What are your Current Sync rates? |
|
rwhubert
Bipolar Athlon
Premium
join:2002-07-26
Atlanta, GA
1 edit | Downspeed on alleged 6 mbps dryline is 1.5 mbps (2016 in router control panel). This is costing me $90 per month. It worked okay till recently. Does anyone know where I can go to find my circuit i.d.? |
|
