[Equipment] How to unlock PAP2T in VOIP Tech Chat http://www.dslreports.com/forum/r21505598 en Wed, 11 Nov 2009 04:21:09 EDT Wed, 11 Nov 2009 04:21:09 EDT Re: [Equipment] How to unlock PAP2T http://www.dslreports.com/forum/remark,21517038 bruhis : No, unfortunately another power adapter did not change anything.
It's really dead dead. No Asia no more for me.]]> http://www.dslreports.com/forum/remark,21517038 Tue, 02 Dec 2008 19:00:53 EDT Re: [Equipment] How to unlock PAP2T http://www.dslreports.com/forum/remark,21506428 mazilo :
said by bruhis See Profile :

I played with my PAP2T, which been sold to me on Ebay as NA from Asia, and now it's appeared dead.
Do yourself a big favor by searching through google about PAP2 devices sold from Asia (HK). Many had reported such a PAP2/PAP2T has some defects that cause the device to brick. If you had an oscilloscope, you may want to look at the DC signals coming out from its AC/DC adapter to see if it can supply a clean DC Voltage to your PAP2T. If it can't, then perhaps replacing with a new AC/DC Voltage adapter with the same ratings will probably fix the problem.
--
Mazilo always prays for FREEBIES!
US Phone: +1-678-601-0907
UK Phone: +44-703-194-2574
]]> http://www.dslreports.com/forum/remark,21506428 Sun, 30 Nov 2008 21:35:53 EDT [Equipment] How to unlock PAP2T http://www.dslreports.com/forum/remark,21505598 bruhis : Hi guys,

I'd like to continue this topic: »[Equipment] how to unlock PAP2T

I played with my PAP2T, which been sold to me on Ebay as NA from Asia, and now it's appeared dead.
I tried to factory reset it with ****, but it wouldn't.
It probably locked to mysipswitch, if it make sense.

I have sip.mysipswitch as a proxy of line 2 (line 1 proxy is blank) and at some other places in web configuration.

When I'm trying to delete everything and get configuration as I had when I've got it, I can't save settings.

There are two LED's on, ethernet and red color power.
An adapter stay this way about 4 min and then for about 10 seconds all LED's on (except line 1), and router's LED is on.
At this moment I was able to get into web configuration or try **** from the phone.

I'd appreciated any help. ]]> http://www.dslreports.com/forum/remark,21505598 Sun, 30 Nov 2008 18:15:07 EDT