US Cable Support > Comcast HSI > Best router on comcast connection?

Best router on comcast connection?

Linksys WRT54GL would be my choice. It has enough throughput for now and can be upgraded if needed.

If you can afford to shell out a few more bucks, the WRT310N, with DD-WRT, is what I use and what I'd recommend to anyoneelse.Gigabit LAN ports, 802.11n, 32 MB of memory so it won't choke even on BitTorrent, etc. Basically the WRT54GL of the 11n world...

reply to PrntRhd
Yea I actually just ordered that one before I saw this post. I am going to try the WRT54GL and I heard you can put DD-WRT firmware on it which will make it really run good, but its risky I don't know yet.

reply to Chaldo
ddwrt is kinda risky.. you could brick your router.. but as long as you dont have a power surge and ur connection doesnt go out your fine...

reply to Chaldo

reply to Chaldo
We will see, I heard the default firmware on the WRT54GL isn't that bad. I don't know if I will put a third party firmware on it yet. All I hear is as long as you don't loose power, or your connection doesn't mess up the install should be fine, or you brick your router.

Actually there are ways to recover most of the time when loading the third party firmware & I always use a UPS to power the modem and router to eliminate those types of issues.

You first download the file and load it from the local PC via the wired connection, not installed from the Internet directly, same goes for upgrades on the OEM Linksys firmware should you choose to stick with the OEM firmware.

Yea I have a UPS and I heard all you do is download the bin to like your desktop go in the config (192.168.1.1) and go to administrative and click firmware upgrade or w/e and then put the path to that bin and cross your figures haha.

reply to PrntRhd
Just to make a statement about 3rd Party firmware: These firmware versions don't "make it run better". It's all about options.
--
Write me up a 125.......I Can't Drive 55 »redrocker.com/ »cabowabo.com/

reply to crf250r

I've heard (but not experienced...I needed the traffic counter that DD-WRT provides) that the stock firmware on the WRT310N isn't good at all, but YMMV. Everyone using DD_WRT seems to be perfectly happy with it.

As to bricking the router, as long as you're upgrading using a wired connection, and the power doesn't go out, you should be good to go. If you want to switch firmware, do so whe you receive the router or soon after; I bricked mine within the return window and was able to get a replacement. My bricking was actually trying to restore the stock firmware. At any rate, my new 310N absolutely flies, and DD-WRT is rock-solid.

Not sure about Tomato, as I have never had a router capable of loading it; the WRT54GL supports Tomato, the WRT310N does not. If you get the GL, there are plenty of firmwares available for installation, so you can pick the one that best suits your needs. I'm familiar with DD-WRT OTOH so I'd probably stick with it even if I did get a GL.

Incidentally, my WRT310N is flashed with the VPN edition of DD-WRT. The upshot is that PPTP is ridiculously easy to set up, and OpenVPN is available (but I haven't figured out how to set it up), so I can access my home network from anywhere PPTP is allowed. Speeds are decent, too, thanks to the 300 MHz processor onboard the router.

A really talented box for $87 right now at Newegg.

reply to Johkal

said by Johkal:

Just to make a statement about 3rd Party firmware: These firmware versions don't "make it run better". It's all about options.