Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Equipment Support » Hardware By Brand » Linksys » BEFSR41
Search Topic:
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
[Wireless] Internet Connection WMP54GS »
« wrt54g disconnects dsl modem  
AuthorAll Replies


flibby3655
Premium
join:2004-12-19
Lompoc, CA


1 edit
reply to flibby3655
Re: BEFSR41

Must be really ignorant... Tried to use the router as a switch. Plugged the line in to the uplink, didn't work. Tried to plug line in to lan 1 and other pc to lan 2 didn't work. Thought I reset the router, didn't work. Help!?

Google really is your best friend! Thank you world!!!!!!

--
The beatings will continue, until morale improves.


Thane_Bitter

join:2005-01-20
London, ON
·Bell Sympatico

Did you turn off DHCP on the BEFSR41, I am working under the assumption that something else on your network is giving out IP leases?

--
The Wagon Queen Family Truckster; sure you think you hate it now, but wait till you drive it.


GeekNJ
Premium
join:2000-09-23
Waldwick, NJ
DHCP only matters if using the WAN port.

Is the original poster all set or is something still not working?


flibby3655
Premium
join:2004-12-19
Lompoc, CA
All set, thanks. Turning off or disabling DHCP is what did the trick.


Thane_Bitter

join:2005-01-20
London, ON
·Bell Sympatico

reply to GeekNJ
said by GeekNJ See Profile :

DHCP only matters if using the WAN port.
The WAN side of that model router can only have a static IP, or have one assigned to it by a DHCP server (I will ignore PPPoE, PPTP since they are not relevant in this discussion); it lacks the architecture for generating address (i.e. no DHCP server functions). The LAN side on the other hand does include a DHCP server (and usually must have a static IP*). Assuming that the OP has another DHCP server on the rest of his/her network (based on the statement "plug line in to lan 1 and other pc to lan 2") issues will arise (duplicate IP’s).

There are ways to run multiple DHCP servers on a network, but pre-configuration is required to prevent address overlap.

*BEFSR41 v 1 - 3 cannot be assigned an IP address by a DHCP server, it might be possible in v4. Something like a WRT54g with 3rd party firmware on the other hand will.
--
The Wagon Queen Family Truckster; sure you think you hate it now, but wait till you drive it.
-
Forums » Equipment Support » Hardware By Brand » Linksys[Wireless] Internet Connection WMP54GS »
« wrt54g disconnects dsl modem  


Sunday, 06-Dec 12:40:40 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.republican-creole
page compression OFF
Most commented news this week
· [163] Comcast Releasing Promised Usage Meter
· [147] Avast Antivirus Has Gone Mad
· [135] The Bandwidth Hog Does Not Exist
· [128] Comcast Makes NBC Universal Acquisition Official
· [105] Graduate Student Unveils Sprint's GPS Sharing With Feds
· [101] Google Invades ISP, OpenDNS Turf With Google Public DNS
· [85] FCC Ponders Moving From PSTN To IP Voice
· [82] Latest Consumer Reports Survey Not Kind To AT&T
· [81] New Bill Aims To Limit ETFs
· [75] Sprint Defuses GPS Privacy Media Bomb
Most people now reading
· Bulb for garage door opener [Home Repair & Improvement]
· Is there any true cure for, or way to prevent, a hangover? [General Questions]
· Wife might have to work in.... Iowa for a few months!!! [General Questions]
· Windows 7 boot manager editing questions [Microsoft Help]
· False positive in Avast! or is it real? [Security]
· How fast is your upstream internet connection? [General Questions]
· Connecting to Google Voice Via SIP [VOIP Tech Chat]
· [DNS] Google's public DNS... performance increases? [Comcast HSI]
· IMG 1.7 (IMG Updates and Discussion) [Verizon FIOS TV]
· Problems with rlslog.net? [TekSavvy]