nixie21
Premium
join:2004-08-19
Harrington Park, NJ
 ·ViaTalk
| HT-S780 onkyo
Today I got home and it seems someone touched my receiver. In the past, when you changed the channel on the TV, the receiver would select the sound for that channel...HD = Dolby dig surround, sd would be all channel select
Today it does not switch, how can I get this working again?
Thanks so much! |
|
royphil345
Premium
join:2004-12-10
Lakewood, OH
clubs:
1 edit | Maybe this setting got changed from "auto"?...
Press and hold the AV receiver’s [DIGITAL
INPUT] button for about 3 seconds.
While “Auto” is displayed (about 3 seconds),
press the [DIGITAL INPUT] button
again to select: PCM, DTS, or Auto.
DTS or PCM:
The DTS or PCM indicator,
depending on which format you have set, flashes,
and only signals in that format are output. Digital
signals in other formats are ignored.
Auto (default):
The format is detected automatically.
If no digital input signal is present, the corresponding
analog input is used instead.
If not... sometimes these high-tech receivers can have errors that require a reset. I believe on your model that just involves unplugging it for awhile.
Good luck!!!  |
|
nixie21
Premium
join:2004-08-19
Harrington Park, NJ | I tried that it still no good....I will go unplug it and see what happens....Thanks! |
|
