Bright House Slams Verizon On FiOS Grounding > What needs to be grounded?

reply to OSUGoose

Re: What needs to be grounded?

Yes there is, i sugest u retrain ur self.

Prove it

its fiber thus non conductive

the fiber its self is. But the armored cable sheath that its enclosed, needs to be, unless they are refering to the fiber drops that are inside conduit, which i dont think had tracer wire sheathing or anything.

reply to OSUGoose
no...... there is no metal in a fiber drop. some have a tracer attached to the side but there is no metal in the drop. I have cut and stripped many of them.

is not what?

Goose you have no idea what you are talking about.THERE IS NO METAL IN A FIBER LOOP. There are fiber loops with a tracer on the side used for locating on buried jobs.

reply to OSUGoose
Educate yourself. Having spliced and cut down many of these
THERE IS NO METAL IN THEM! The are wrapped in Kevlar. Also very few of the tracable buried service feeds are actually in use.

Key word there, ur ferering to aerial, im refering to burried

Buried drops that are used in Florida that do have a 24ga "tracer" wire ARE grounded at the ONT or to the MGN at the house per Verizon's Bonding and Grounding Rules. There were some early installs (2005) that the fiber did not have a tracer so a 3 pair copper drop was buried along side of the fiber for locating purposes but those copper drops were not connected to the house they were just cut off at ground level.
Trust me we are in the LIGHTNING CAPITAL and we (Verizon)along with Tellabs have tried everything possible in trying to prevent ONT's from getting taken out by lightning. In fact the new 612A that is coming out is a result from Tellab's testing in Florida, 612A will have additional surge suppression built into the POTS connections.