| Speedstream 5200 telnet password/image/"hacking"Does anyone have information on setting a telnet password for use with the Speedstream 5200, Doctor Olds I see your involvement in a lot of threads regarding this topic. The 5200 is black, not black/grey.
I have downloaded the configuration from »192.168.254.254/xcfg and reviewed the user profiles listed, however, none of these work with telnet. I've also tried the telco profile link of »192.168.254.254/pfwizardj.cgi?co···retain=f and I see this username in the configuration, however, it does not work. I've seen the SNAP FTP password utility and read the documentation (I have no Win32 boxes) but my understanding is vague. It seems this is a temporary password.
Is the telnet access defined by the per= (I assume permissions)? Please note that I added the mfadmin account using the pfwizard, this was not present before.
Below is the config snippet, line-breaks added by me, and password obfuscated (mods, no need to change it)
Doctor Olds, not sure if you new, but the firmware/configuration is also accessible by accessing »192.168.254.254/x.img x.def x.cfg x-boot.img
I am in the process of analyzing x.img in a hex editor.
,upro#0{usr{un="admin",pw="mypassword",per=0x8000000C}
,acc{ddns=y,qsw=y,rip=y,upnp=y,ac=y,adv=y,stat=y,fw=y,dhcp=y,user=y,imap=y,napt=y,help=y,sntp=y,slog=y,home=y,oe=y,wslh=y,host=y,rout=y,diag=y,link=y,upro=y,eras=y}
,last=y,ne=y}
,upro#1{usr{un="mfadmin",pw="mypassword"}
,acc{ddns=y,spo=y,qsw=y,rip=y,brg=y,upnp=y,ac=y,adv=y,stat=y,fw=y,dhcp=y,user=y,imap=y,uloc=y,urem=y,napt=y,help=y,sntp=y,slog=y,home=y,oe=y,wslm=y,host=y,rout=y,diag=y,link=y,upro=y,eras=y}
,nl=y,ne=y}
,upro#2{usr{per=0x4}
,acc{ac=y,stat=y,help=y,home=y,oe=y,wslh=y,link=y}
,nl=y,ne=y}
,dsl{mode=auto}
,upnp{en=y}
,ads{dis=y}
,napt{nsrv#0{prot=1,ip=127.0.0.1,en=y}
}
The telnet daemon is listening.
luser@meowbox:~$ nc 192.168.254.254 23
SpeedStream Telnet Server
login:
|
