how-to block ads
|
Sir Meowmix III
| Speedstream 5200 telnet password/image/"hacking"Does anyone have information on setting a telnet password for use with the Speedstream 5200, Doctor Olds I see your involvement in a lot of threads regarding this topic. The 5200 is black, not black/grey.
I have downloaded the configuration from »192.168.254.254/xcfg and reviewed the user profiles listed, however, none of these work with telnet. I've also tried the telco profile link of »192.168.254.254/pfwizardj.cgi?co···retain=f and I see this username in the configuration, however, it does not work. I've seen the SNAP FTP password utility and read the documentation (I have no Win32 boxes) but my understanding is vague. It seems this is a temporary password.
Is the telnet access defined by the per= (I assume permissions)? Please note that I added the mfadmin account using the pfwizard, this was not present before.
Below is the config snippet, line-breaks added by me, and password obfuscated (mods, no need to change it)
Doctor Olds, not sure if you new, but the firmware/configuration is also accessible by accessing »192.168.254.254/x.img x.def x.cfg x-boot.img
I am in the process of analyzing x.img in a hex editor.
The telnet daemon is listening.
| |
| 
Sir Meowmix III
| Re: Speedstream 5200 telnet password/image/"hacking"From the firmware:
| |
|
Sir Meowmix III
| Funny things in the firmware like "Steve's Nose was here"
"St3vEsN0zeWuZH3r" at offset F9416 | |
| | 
wayjac
Premium,MVM
join:2001-12-22
Indy | Re: Speedstream 5200 telnet password/image/"hacking" said by Sir Meowmix III :
The 5200 is black, not black/grey
Are you sure?
 | |
|
Sir Meowmix III
| Seems this covers things well if it's applicable, »SBC DSL FAQ »How can I access the Speedsteam modem's CLI?
Doctor Olds & others, are there any useful telnet debugging commands to get line data or is the CLI mainly for configuration only? I'm looking for something like near_line far_line data which was present on the Alcatel Speedtouch Home/Pro/510 series. | |
|
Sir Meowmix III
| It's the second one in the picture, 100% black. I did have a black/grey but it was nuked. | |
| | | | |
Sir Meowmix III
@windstream.net
| Re: Speedstream 5200 telnet password/image/"hacking" said by wayjac  :Both are speedstream 5200 modems The all black one is a newer model 5200 I know this, you've misread what I wrote. I was indicating that I have a black 5200, not black/grey, for the purposes of identifying the revision. I understand they come in the black and black/grey flavors, I even owned one in black/grey, and that they are both 5200. | |
| | | |
wayjac
Premium,MVM
join:2001-12-22
Indy | Re: Speedstream 5200 telnet password/image/"hacking" Yes, I misread what you posted | |
| | 
Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
clubs:
| said by Sir Meowmix III :
I've seen the SNAP FTP password utility and read the documentation (I have no Win32 boxes) but my understanding is vague. It seems this is a temporary password.
Making a permanent Username/Password for Telnet and FTP is discussed here:
»A50 FW on 5200, no telnet or FTP !!!
said by buggage :
Use ICGabe's utility to telnet into the modem.
Once in, type these commands:
cfg upro#1{usr{un=username
cfg upro#1{usr{pw=password
cfg upro#1{usr{per=0xFFFFFFFF
cfg save
do reboot
When the modem reboots, you will be able to telnet/FTP using the username and password you created. You won't need to use the FTP Tool again, unless you reset the modem.
I forgot that the telnet login was the same as that for FTP. Works great after using ICGabe's util. Many thanks.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? | |
|
Sir Meowmix III
@windstream.net | Doctor Olds, thanks for your reply. What's odd is that I already have a #1 profile defined. Is the per= line hex for permissions, and 0xFFFFFFFF indicates no restrictions?
Thanks | |
| | | | buggage
Premium
join:2002-11-28
| Hi
Yes the 0XFFFFFFFF grants full permissions to the router for whichever profile it's set for. The best way is to set this per for upro#0 (admin), then you will be able to use the same username and password to log into both the router interface and the FTP/telnet interfaces.
Using upro#1 isn't necessary. | |
| 
d_l
Barsoom
Premium,MVM
join:2002-12-08
Reno, NV
| There should be line data similar to this available:
xsh> show dsl stat
--- DSL Status
DSL State - Up
Tx Rx
CRC Errors 17 530
FEC Errors 0 0
HEC Errors 0 0
NCD Errors 0 0
LCD Errors 0 0
LOS Errors - 0
SEF Errors - 0
--- ATU-R Channel Info
Current Tx Rate - 768000
Previous Tx Rate - 768000
Interleave Delay - 2483490196
--- ATU-C Channel Info
Current Tx Rate - 6016000
Previous Tx Rate - 6016000
Interleave Delay - 0
--- ATU-R Physical Layer Info
Current SNR Margin - 14.5
Current Attenuation - 29.0
Current Status:
No defects detected
No loss of framing detected
No loss of signal detected
No loss of power detected
No loss of signal quality detected
--- ATU-R Line Status
Line Coding - dmt
Line Type - fast
Actual ADSL Mode - G.dmt
Requested ADSL Mode - ANSI
xsh> show dsl ber
DOWNSTREAM BER = 1.49e-10 CRC = 530 TIME = 595677 DATA RATE = 6016000
FEC (not included in BER) = 0
UPSTREAM BER = 3.75e-11 CRC = 17 TIME = 595677 DATA RATE = 768000
FEC (not included in BER) = 0
xsh> show dsl tones Test DISABLED
xsh> show dsl bins
Tone Bit Allocation Margin
0 0 -
1 0 -
2 0 -
3 0 -
4 0 -
5 0 -
6 0 -
7 7 ******* -
8 8 ******** -
9 8 ******** -
10 9 ********* -
11 10 ********** -
12 10 ********** -
13 10 ********** -
14 10 ********** -
15 10 ********** -
16 10 ********** -
17 10 ********** -
18 10 ********** -
19 10 ********** -
20 10 ********** -
21 10 ********** -
22 10 ********** -
23 10 ********** -
24 10 ********** -
25 10 ********** -
26 9 ********* -
27 9 ********* -
28 8 ******** -
29 8 ******** -
30 0 -
31 0 -
32 0 0.0
33 0 0.0
34 0 0.0
35 0 0.0
36 0 0.0
37 0 0.0
38 9 ********* 13.5
39 10 ********** 14.0
40 10 ********** 14.0
etc.
| |
|
Sir Meowmix III
@windstream.net | Thank you everyone for your replies and help. | |
| | | |
|
