Re: Speedstream 5200 telnet password/image/"hacking"

Author	All Replies
Sir Meowmix III @windstream.net	reply to Sir Meowmix III Re: Speedstream 5200 telnet password/image/"hacking" Doctor Olds, thanks for your reply. What's odd is that I already have a #1 profile defined. Is the per= line hex for permissions, and 0xFFFFFFFF indicates no restrictions? Thanks
Sir Meowmix III @windstream.net	to forum · permalink · 2009-01-01 08:45:37 ·
Doctor Olds I Need A Remedy For What's Ailing Me. Premium,VIP join:2001-04-19 1970 442 W30 clubs:	said by Sir Meowmix III : Doctor Olds, thanks for your reply. What's odd is that I already have a #1 profile defined. Please read the entire thread linked previously as you are skipping/missing important details..... There are three hidden profiles numbered 0, 1, and 2. »Re: A50 FW on 5200, no telnet or FTP !!! said by gpontis : It should be mentioned that upro#1 is unrelated to user profile #1 that can be modified from the web GUI. Regards, Doctor Olds -- What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?
	to forum · permalink · · 2009-01-01 10:30:22 ·
buggage Premium join:2002-11-28	reply to Sir Meowmix III Hi Yes the 0XFFFFFFFF grants full permissions to the router for whichever profile it's set for. The best way is to set this per for upro#0 (admin), then you will be able to use the same username and password to log into both the router interface and the FTP/telnet interfaces. Using upro#1 isn't necessary.
buggage Premium join:2002-11-28	to forum · permalink · · 2009-01-01 10:37:10 ·


Tuesday, 10-Nov 21:00:41	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF