Re: Speedstream 5200 telnet password/image/"hacking"

buggage Premium join:2002-11-28	reply to Sir Meowmix III Re: Speedstream 5200 telnet password/image/"hacking" Hi Yes the 0XFFFFFFFF grants full permissions to the router for whichever profile it's set for. The best way is to set this per for upro#0 (admin), then you will be able to use the same username and password to log into both the router interface and the FTP/telnet interfaces. Using upro#1 isn't necessary.
	to forum · permalink · · 2009-01-01 10:37:10 ·
Doctor Olds I Need A Remedy For What's Ailing Me. Premium,VIP join:2001-04-19 1970 442 W30 clubs:	reply to Sir Meowmix III said by Sir Meowmix III : Doctor Olds, thanks for your reply. What's odd is that I already have a #1 profile defined. Please read the entire thread linked previously as you are skipping/missing important details..... There are three hidden profiles numbered 0, 1, and 2. »Re: A50 FW on 5200, no telnet or FTP !!! said by gpontis : It should be mentioned that upro#1 is unrelated to user profile #1 that can be modified from the web GUI. Regards, Doctor Olds -- What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?
	to forum · permalink · · 2009-01-01 10:30:22 ·
Sir Meowmix III @windstream.net	reply to Sir Meowmix III Doctor Olds, thanks for your reply. What's odd is that I already have a #1 profile defined. Is the per= line hex for permissions, and 0xFFFFFFFF indicates no restrictions? Thanks
	to forum · permalink · 2009-01-01 08:45:37 ·


Friday, 04-Dec 04:40:23	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF