Re: Mikrotik queues accurate?

Author	All Replies
snowpro2000 join:2004-06-13 Canada	reply to DiSdAiN Re: Mikrotik queues accurate? I am using 2.9.50 on the router only because it has been very stable and was affraid to upgrade. Its pretty easy to setup so I don't know how I could screw that up.....
	to forum · permalink · · 2009-01-03 20:28:15 ·
Mike_27 Premium join:2004-05-15 Gardiner, MT	here try this: /queue simple \ add name="simple-test" target-addresses=192.168.1.45/32 dst-address=0.0.0.0/0 \ interface=all parent=none direction=both priority=8 queue=default/default \ limit-at=0/0 max-limit=512000/512000 total-queue=default-small disabled=no hth, Mike
	to forum · permalink · · 2009-01-03 22:15:47 ·
epicproblem join:2007-09-16 Sacramento, CA	reply to snowpro2000 hey snowpro, What is your setup like? How do you like the NS2?
	to forum · permalink · · 2009-01-04 04:03:15 ·
thewisperer Premium join:2008-01-16 ·TekSavvy Solutions..	I have very small network. I have spoken to people who have many ns2 and they say they rock. Let's hope they will rock for a long time. That's hard to predict. But for the price (compared to Mikrotik cpe) if you have problems after a few years, you can replace them at low cost. They will have paid for themselves. Mike_27: I am using winbox and my queues are set up just as you suggest.
	to forum · permalink · · 2009-01-04 11:00:29 ·
snowpro2000 join:2004-06-13 Canada	reply to epicproblem As everyone says, they are cheap and reliable. I wonder if the Loco will do as well. It would allow us to lower installation costs. Subsidise the installation cost to get recurring revenue. Its been done in the alarm industry for years now.
	to forum · permalink · · 2009-01-04 11:15:13 ·
lutful Premium join:2005-06-16 Ottawa, ON ·TekSavvy Solutions..	reply to thewisperer said by thewisperer : Mike_27: I am using winbox and my queues are set up just as you suggest. Please post your current configuration for Mike and others -I am sure they will be able spot if something is not quite right. You could either save a full system backup using system backup> save name=wisperer_full or export just the queue configuration using queue simple>export file=wisperer_queue For any complex WISP systems, and specially Mikrotik, it is useful to save current settings as you experiment.
	to forum · permalink · · 2009-01-04 12:55:19 ·


Friday, 27-Nov 00:52:59	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF