dslreports logo
 
    All Forums Hot Topics Gallery
spc
Search similar:


uniqs
1074
kenneyb
join:2002-02-19
San Diego, CA

kenneyb

Member

Question concerning Uverse and my LAN

If and when I switch to Uverse ( shortly )
how much, if any, of my present LAN can I use?
So I replace my ADSL Modem ( AT&T ) with a
Uverse Gateway which creates a NAT. Presently
I have my own 100-BaseT LAN on which is lets
say 6 computers and a couple switches only two
of which are on at any given time. The GW is
connected to the HDTV. I choose to purchase a
second Uverse box to run a second HDTV. As I
understand the way this works I simply connect
that second box to the LAN and it gets supported
through it's own IP on the presently existing LAN.

OR

Do I have to build a completely separate LAN
that does not carry the Internet traffic?

Thanks
MyDogHsFleas
Premium Member
join:2007-08-15
Austin, TX

MyDogHsFleas

Premium Member

The best way to do this is to put your home LAN onto one of the RG (Residential Gateway) Ethernet ports via a switch, and connect the STBs (Settop Boxes) to the other ports. This keeps the video traffic off your home LAN and vice versa.
kenneyb
join:2002-02-19
San Diego, CA

kenneyb

Member

said by MyDogHsFleas:

The best way to do this is to put your home LAN onto one of the RG (Residential Gateway) Ethernet ports via a switch, and connect the STBs (Settop Boxes) to the other ports. This keeps the video traffic off your home LAN and vice versa.
Kool, that's right there's I think 4-ports on the back
of the GW so in effect I can put the STP's there.
Thanks

djrobx
Premium Member
join:2000-05-31
Reno, NV

djrobx to kenneyb

Premium Member

to kenneyb
If there's coax running to that second HDTV they can use that to power the TV.

The major issue to keep in mind is to not have a wireless access point and a U-verse STB be split from a single switch. Doing so will overload the wifi network with TV multicast traffic and make it useless. Computers and other devices hardwired into the network will most likely be able to ignore the traffic without any issue.

The U-verse RG has extra "smarts" in it called IGMP snooping that can keep TV traffic off of the network if there are no STBs connected to that port.
kenneyb
join:2002-02-19
San Diego, CA

kenneyb

Member

said by djrobx:

If there's coax running to that second HDTV they can use that to power the TV....
Thanks