My ping times are the same on 10 ASDL2+ as they were with fast path.
I was told also that the 10M plan defaults to fast path, but I can't find a way to 'see' that information using the previous Telnet commands:
EMBARQ> wan adsl chandata
DSL standard: ADSL2PLUS
near-end bit rate: 11773 kbps
far-end bit rate: 1023 kbps
Anyway, my first and second hop results to Embarq dot com are the same as when I was on 3.0 Fastpath (notebook -> wifi access point -> switch -> router):
traceroute to embarq.com (168.251.192.15), 64 hops max, 40 byte packets
1 192.168.2.1 (192.168.2.1) 1.802 ms 1.344 ms 1.286 ms
2 va-76-5-72-1.dhcp.embarqhsd.net (76.5.72.1) 7.773 ms 8.609 ms 8.226 ms
3 va-69-34-35-93.sta.embarqhsd.net (69.34.35.93) 8.661 ms 8.248 ms 8.992 ms
4 sl-gw20-rly-3-0.sprintlink.net (160.81.67.213) 16.250 ms 16.618 ms 16.249 ms
5 sl-crs1-rly-0-5-0-2.sprintlink.net (144.232.3.60) 16.274 ms 16.747 ms 18.976 ms
6 sl-crs2-akr-0-2-3-0.sprintlink.net (144.232.9.217) 32.727 ms 32.227 ms 32.274 ms
7 144.232.3.232 (144.232.3.232) 32.718 ms 32.333 ms 32.469 ms
8 sl-bb22-roa-9-0-0.sprintlink.net (144.232.18.111) 34.046 ms 33.914 ms 34.070 ms
9 sl-gw20-roa-9-0.sprintlink.net (144.232.17.186) 34.258 ms 33.701 ms 34.283 ms
10 sl-sprintut-258809-0.sprintlink.net (160.81.187.66) 50.009 ms 49.948 ms 49.720 ms
--