d_l
Barsoom
Premium,MVM
join:2002-12-08
Reno, NV
1 edit | reply to texasbanzai
Re: Upgraded to DSL Pro, only getting 2.0Mbps - 1.5 mi from CO
There is an automatic, 10-day long, two-speed step, speed ramp on upgrades for the lines connected to a CO. You are on the ramp. Leave your 2Wire on 24/7 to complete the speed ramp.
You can check if your line has enough maxrate "headroom" to handle the full 3008 speeds here: »homeportal/management/link_statistics.html
More advanced 2Wire info here: »Ameritech - SBC FAQ »Where is all the fancy stuff? (Management/Diagnostic Console)
Chances are high that with an attenuation of 54.8 dB your line will fail to make the speed steps in the next 10 days. If that happens the the techs in AT&T Direct forum can manually raise your speed to the full 3008 IF your line can support that speed stably. Wait until your 10 days have passed before taking it to them. |
|
texasbanzai
join:2009-01-13
| Awesome, thanks for the info! I assume the Max Rate below indicates the fastest speed my router can handle?
DSL Down Up
Current Rate: 1984 kbs 512 kbs
Max Rate: 3616 kbs 836 kbs
Current Connection:
Current Noise Margin 11.0 dB 16.0 dB
Current Attenuation 54.8 dB 31.5 dB
Current Output Power 18.1 dB 11.9 dB |
|
