jimbopalmer
Tsar of all the Rushers
join:2008-06-02
Greenwood, MS
 ·Windjammer Cable
| Starting with the Linksys config
(all the passthroughs can be disabled, but are not hurting)
Local Secure Group should be a Subnet, (not IP Addr.) I would guess something like 192.168.3.0 (The local IP address of the Linksys router, with a 0) You seem to have a subnet mask typed in here, not an IP Address.
Remote Secure Group should be a Subnet, (not IP Addr.) I would guess something like 192.168.1.0 (The local IP address of the Netopia router, with a 0) You seem to have a subnet mask typed in here, not an IP Address.
In the Advanced config, turn on stay alive.
Hope this helps
--
I tried to remain child-like, all I achieved was childish. |
