site Search:


 
    All Forums Hot Topics Gallery






how-to block ads


 
Search Topic:
Share Topic
Posting?
Post a:
Post a:
Links: ·Cayman FAQ ·DSLR Equipment Page ·Netopia Latest Firmware
AuthorAll Replies

jimbopalmer
Tsar of all the Rushers

join:2008-06-02
Greenwood, MS
kudos:2
Reviews:
·Windjammer Cable

reply to steev

Re: [netopia] netopia 3347 with other router

I would be sorely tempted to connect the two routers in the same room with a short, professionally made cable to try to eliminate cabling at this point. Do you get 80% packet loss with a new cable?
--
I tried to remain child-like, all I achieved was childish.


davidg
Good Bye My Friend
Premium,MVM
join:2002-06-15
none

i agree. it is conencting at 100mb, and if the cable is not pinned out properly you get all sorts of errors. i have some 10mb conenctions running on freaking ribbon cable and working great, but split a pair on a 100mb connection it goes to crap.
--
Lack of Preparation on YOUR Part does NOT Constitute an Emergency on Mine!



steev

@qwest.net

reply to jimbopalmer
well i think i would eliminate the cable as a problem since when i have a computer connected directly to the netopia with the same cable i get 0% loss.



davidg
Good Bye My Friend
Premium,MVM
join:2002-06-15
none

but is teh PC conencting at 100mb FULL duplex? if not the cable could still be the problem.

one last thign it can be tha thas happened to me before is that BOTH devices support auto polarity sense. this messes with each other and they both keep flipping TX and RX pairs. if one has the optioin to turn this off, do it.
--
Lack of Preparation on YOUR Part does NOT Constitute an Emergency on Mine!



steev

@qwest.net

my apologies, y'all were right. it's the cable.
i went ahead and tested with a short store-bought cable and i got perfect throughput.
damn. all that for some badly terminated cable!

many thanks for all your help!!



davidg
Good Bye My Friend
Premium,MVM
join:2002-06-15
none

don't feel bad, i hav efought that battle myself. i now have a good ethernet tester that checks for split/reversed pairs as well as just continuity and use it anytime i have an issue.
--
Lack of Preparation on YOUR Part does NOT Constitute an Emergency on Mine!


Thursday, 31-May 08:33:02 Terms of Use & Privacy | feedback | contact | Hosting by nac.net - DSL,Hosting & Co-lo
over 12.5 years online © 1999-2012 dslreports.com.
Most commented news this week
Hot Topics