Netopia 3347-02-1002 Pinhole and IPMap

Forums » Equipment Support » Hardware By Brand » Netopia/Cayman » Netopia 3347-02-1002 Pinhole and IPMap


Uniqs: 1264	Share Topic:	RSS topic:	toggle: flat / full normal / watch	Posting:	Post a:	Post a:

Links: ·Cayman FAQ ·DSLR Equipment Page ·Netopia Latest Firmware

rcgjoe

@ameritech.net

Netopia 3347-02-1002 Pinhole and IPMap

My old modem from AT&T died and they've upgraded me to a Netopia 3347-02-1002. I have a static subnet from them that was setup on my old modem so I could forward port 3389 on one of my IPs to my terminal server. With this new modem, it seems I can either only forward all traffic to the static IP (bad, because it leaves the Windows server completely open to the world) or I can only forward the one port on the main NAT IP.

Is there a way to set the WAN IP used for the pinhole, or a way to firewall the IPMap on the Netopia? Thanks!

permalink · 2009-02-16 16:34:31 · Print ·

dgilbert
Good Bye My Friend
Premium,MVM
join:2002-06-15
none
clubs:

Re: Netopia 3347-02-1002 Pinhole and IPMap

nope, when dealing with multiple public static ips you send it all. about the only thing i can tell you would be to upgrade the 3347 to an ENTerprise version(just software) and then you get a lot better firewall.

or you can put a linksys or other router behind the 3347 and point the static to it then NAT it to the server. but that can get to be a headache to keep up with!
--
Lack of Preparation on YOUR Part does NOT Constitute an Emergency on Mine!

permalink · 2009-02-17 10:52:37 ·

rcgjoe @comcast.net	Crap...that's what I was afraid of. Thanks for your help!
	permalink · 2009-02-17 15:37:23 ·

your comment..

Forums » Equipment Support » Hardware By Brand » Netopia/Cayman


Thursday, 10-Dec 19:16:34	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. page compression OFF