config suggestions for netopia 3347-02? in Netopia/Cayman

config suggestions for netopia 3347-02? in Netopia/Cayman http://www.dslreports.com/forum/r21937346 en Sat, 28 Nov 2009 22:47:25 EDT Sat, 28 Nov 2009 22:47:25 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,22054168 anon : Many thanks Airwolf7 for the sound advice.

I have one issue/feature I need.

I use "PPP is on the modem", where the public IP is passed to my dual-band router. I'm wondering if I can also have it done on the Netopia 3347?

I've seen older DSL modem would simply pass 192.168.0.1 to my 192.168.1.1 router... when PPP is on the modem -- which creates headache when trying to access my net from outside, a very problematic double-nat. The SS4100 actually passes on the public IP to my router, which is GREAT!!!

I need the separate net for my 802.11n stuff, and am wondering if the 3347 can do it?]]> http://www.dslreports.com/forum/remark,22054168 Wed, 11 Mar 2009 19:55:30 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,22049970 Airwolf7 : I would avoid the Motorola Netopia 2210-02 like the plague.

A fellow just can't go to wrong with a Motorola Netopia 3347-02 ADSL2+ Wireless Gateway.

Don't forget that you can also order one online from the AT&T Store.

»store.att.com/catalog/productdet···d=catMRG
--
It is not possible to achieve 'equality' between things that are, fundamentally, not equal!]]> http://www.dslreports.com/forum/remark,22049970 Wed, 11 Mar 2009 03:45:35 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,22046008 anon : Thanks for the info. Airwolf7,

I didn't get the Motorola 2210 because it is almost identical to the Speedstream 4100, without ack prioritization, and burns itself out in a few months. Even though their firmware is similar, with twice the ram, I figure it'll be MUCH more reliable than the Motorola 2210. No wonder it's used for businesses & most 24/7 connections. My friend did some thermal monitoring on his 2210 and said as long as you do not constantly run p2p applications on a high speed line constantly, the temperature only remains relatively warm.

Heeding your advice, I'll get a Netopia 3347 when I'm at the AT&T store next week located near the mall. Only $20 more than a 2Wire (there most popular). Few people seem to want them "business-class modems". If needed, I can always ask them to do a special order.]]> http://www.dslreports.com/forum/remark,22046008 Tue, 10 Mar 2009 14:01:25 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,22042380 Airwolf7 : I don't care much for the Motorola Netopia 2210-02-1006 modem because I don't think it is very reliable. I love the Motorola Netopia 3347-02-1006 because it has shown me that it it is ten foot tall and bulletproof.

Neither of them have "ack prioritization". They could because they are based on the TI AR7 family of processors and these processors have a feature called the TurboDSL™ Packet Accelerator. This feature would have to be implemented and enabled by the modem manufacturer in the firmware. It's not with the Netopia/Motorola Netopia modems.

.

[att=1]

High-performance Operation - TI’s TurboDSL™ Packet Accelerator

"The AR7 is architected for optimal performance in delivering high-bandwidth services like combined data and video. TI’s TurboDSL™ Packet Accelerator, a unique performance enhancement of the AR7 platform, minimizes the “choking” effect on pipeline traffic. The TurboDSL™ hardware uses a Priority Queuing feature to send prioritized TCP Ack packets ahead of the other upstream traffic, resulting in an up to 3x increase in downstream throughput without impacting upstream data transfer rate. Because of the asymmetrical nature of ADSL, the effect of TurboDSL will increase by up to 6x as service providers migrate to ADSL2/2+ deployments."

.

I'm in the AT&T Southeast region. This was the old BellSouth.

All of our ADSL2+ capable modems, except for the 2Wire modems, are based on the TI AR7 processor. None of them with current firmware are capable of "ack prioritization". The Westell 6100 and maybe the Westell Versalink 327W had a feature called "TurboTCP". TurboTCP was TI’s TurboDSL™ Packet Accelerator re-branded by Westell.

I used a BellSouth supplied Westell 6100 when it had a firmware version that included the option to enable TurboTCP. This feature worked as advertised. This feature was hidden from the configuration GUI with a later firmware update. Why they did this I don't know. It pisses me off.

The configuration GUI is just a website and the pages in the configuration GUI are just webpages. You can go to the webpage in the configuration GUI and look at the source code and the TurboTCP option is still there. It's just hidden from view. There is some way to attack websites and inject code into them. I bet a smart fellow could figure out some way to enable TurboTCP on those Westell's.
--
It is not possible to achieve 'equality' between things that are, fundamentally, not equal!

ar7_turbodsl···f[1].pdf 123,022 bytes
TI AR7 TurboDSL Brief

]]> http://www.dslreports.com/forum/remark,22042380 Mon, 09 Mar 2009 20:32:51 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,22040065 anon : I have a SpeedStream 4100, a fairly old unit, and it seems to not choke if I saturate u/l. I've skipped the Motorola 2210 "free" deal about a year or so ago for $13 shipping. I'm thinking of getting a Netopia 3347-02.

Does anyone know if it has "ack prioritization"? Since under the hood it's very similar to a Motorola 2210, with wireless, and less a few ports and half the flash and memory.]]> http://www.dslreports.com/forum/remark,22040065 Mon, 09 Mar 2009 13:39:35 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21978562 GoBG :

said by antsii

:

Hi all,

Just wanted to give an update. Bell looked after my ticket, and they made some changes, namely that they activated 'fast mode' on my line.
:)

Fastpath!!!

]]> http://www.dslreports.com/forum/remark,21978562 Thu, 26 Feb 2009 00:16:42 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21978337 antsii : Hi all,

Just wanted to give an update. Bell looked after my ticket, and they made some changes, namely that they activated 'fast mode' on my line. Not sure if there is a 'slow mode' too

I waited a few days before posting, and it seems that everything is fine with my connection now. I'm getting the speeds I should be (and paid for)!

Thanks to everyone here, including the helpful folks at Caneris and TekSavvy tech support. You have made it as stress-free as possible! :)]]> http://www.dslreports.com/forum/remark,21978337 Wed, 25 Feb 2009 23:22:32 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21950751 antsii : Well, TekSavvy has diagnosed my line and found some packet loss. So they placed a ticket in the queue and I'm waiting for reinforcements on their end.

Will let you know how it goes. Thanks so much everyone. You've all been really helpful :)]]> http://www.dslreports.com/forum/remark,21950751 Fri, 20 Feb 2009 20:26:52 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21946240 GoBG : I take it back.. your line is pretty bad according to the test.

And you verified its not the modem. ]]> http://www.dslreports.com/forum/remark,21946240 Fri, 20 Feb 2009 04:37:13 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21946016 antsii : I tried a friend's modem, and the result was the same.. download speeds of around 1000.

Here are some line stats. Does this give any useful info?

]]> http://www.dslreports.com/forum/remark,21946016 Fri, 20 Feb 2009 01:45:13 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21944483 GoBG : Have you done a line quality test? »/linequality

You may want to see the results of that... nevertheless, If the results are the same on the new modem the fault lies with TekSavvy.]]> http://www.dslreports.com/forum/remark,21944483 Thu, 19 Feb 2009 20:16:13 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21943270 anon : Yup, I spoke too soon. Back to dismal speeds again..

But I will be trying another modem tonight. Updates coming.. thanks again everyone.]]> http://www.dslreports.com/forum/remark,21943270 Thu, 19 Feb 2009 16:47:39 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21941725 GoBG : Hopefully the speeds will stay... If it happens again(speed drop) borrow a friends modem and see if it still does it. I doubt its the modem myself... Either it works or it doesn't.]]> http://www.dslreports.com/forum/remark,21941725 Thu, 19 Feb 2009 12:32:44 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21941466 anon : Hey guys,

Some interesting results.

I tried to update my modem with the firmware version 7.7.4 v1, but the installation failed. No reason was given besides that it failed.

However, I tried updating the firmware to 7.6.1 r9 (the latest official version for my model). It worked, even though my model no. says 3347-02-1002.

»netopia.com/support/hardware/334···006.html

My speeds seem to have increased.

However, like I posted earlier, I was sporadically getting these speeds last night before upgrading the firmware. So I'll keep an eye on things, and post the results in a couple days.]]> http://www.dslreports.com/forum/remark,21941466 Thu, 19 Feb 2009 11:51:31 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21941124 anon : Thanks for the messages everyone. Just to bring both threads up to speed, I have had the modem replaced. Tech support at TekSavvy suggested that my laptop could have a faulty NIC or driver, but I borrowed a friend's laptop, and the speeds were the same.

I've used the Teksavvy speedtest, here are the results. These is with the firmware that came with the modem.

Strangely, for about a couple hours last night, the speeds were up to 3000/600. However, it's now back to this territory. Any thoughts about that?

I will be trying the new firmware today!]]> http://www.dslreports.com/forum/remark,21941124 Thu, 19 Feb 2009 10:41:01 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21940880 CanerisErik : This poster has started a thread about this issue at »slow connection with netopia 3347 but then disappeared. I invited him to call us to troubleshoot as if it turned out to be a defective modem and our terms of warranty are satisfied, we would replace it.
--
Erik - Caneris - Internet solutions and more.]]> http://www.dslreports.com/forum/remark,21940880 Thu, 19 Feb 2009 09:47:35 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21939884 GoBG : Here's my speed using TekSavvy test.

]]> http://www.dslreports.com/forum/remark,21939884 Thu, 19 Feb 2009 00:59:09 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21939556 Airwolf7 : Some speed tests are better than others. Speeds are not guaranteed, it is a "Best Effort" service. Your ISP has no control over your traffic once it leaves their network. Try running a speed test that is hosted on your ISP's network.

»TekSavvy FAQ »Speed Test Tool - TSI and Others together]]> http://www.dslreports.com/forum/remark,21939556 Wed, 18 Feb 2009 23:30:06 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21938644 GoBG : Try the nta774r1.bin firmware. It was recommend to me by member tranle.
»High Performance 3300 series

At first I was little hesitant because its not displayed for our model but its the latest firmware and it works great for me. Netopia modems has a safe guard where it will not load a firmware that doesn't match the hardware.

You can find the nta774r1.bin firmware here: »www.netopia.com/support/hardware/2246.html

Here's proof of me running it on my 3347:

My Speed Package:
3000 Down
800 up

]]> http://www.dslreports.com/forum/remark,21938644 Wed, 18 Feb 2009 20:35:52 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21938577 anon : I haven't tried any firmware updates. I've hesitated because I haven't found the exact model number 3347-02-1002 on the web site.

Should I try one of these?

»www.netopia.com/equipment/purcha···ate.html]]> http://www.dslreports.com/forum/remark,21938577 Wed, 18 Feb 2009 20:24:26 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21938523 anon : The model number on mine says 3347-02-1002. I haven't found any posts with that particular number, mostly -1006 like you mentioned.

I bought it the modem generic from a third party company, Caneris. There are some posts with this combo of modem/router with TekSavvy ISP working well, so I figured I wouldn't have a problem.]]> http://www.dslreports.com/forum/remark,21938523 Wed, 18 Feb 2009 20:14:51 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21938495 anon : I would be flattered if my Internet worked properly :D ;)]]> http://www.dslreports.com/forum/remark,21938495 Wed, 18 Feb 2009 20:10:52 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21938310 GoBG : To be honest your line does look spotless... Have you tried any firmware updates?

You say its the "3347-02" Is it the bellsouth "3347-02-1006" or an actual retail model?]]> http://www.dslreports.com/forum/remark,21938310 Wed, 18 Feb 2009 19:35:40 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21938267 GoBG : Okay, lets compare notes... your line attenuation is amazing!

I'm still looking over the rest.]]> http://www.dslreports.com/forum/remark,21938267 Wed, 18 Feb 2009 19:27:32 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21938226 anon : This might be overkill, but here goes.

]]> http://www.dslreports.com/forum/remark,21938226 Wed, 18 Feb 2009 19:21:20 EDT Re: config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21938161 GoBG : Log into your modem and Post this:

ADSL Line State:        UpADSL Startup Attempts:  3ADSL Modulation:        ADSL2+ADSL Data Path:         FastCO vendor:              BDCMPower Management State  L0Datapump Version:       DSP 7.2.3.0, HAL 7.2.1.0                        Downstream  Upstream                        ----------  ----------SNR Margin:                  24.50       13.90 dBLine Attenuation:            30.70       16.60 dBOutput Power:                19.43       12.26 dBmErrored Seconds:                 0           0Loss of Signal:                  0           0Loss of Frame:                   0           0CRC Errors:                      0         344Data Rate:                    3627         943 atucRevisionNum            2 ATU-C Vendor ID         BDCMTrainedPath             Fast TrainedMode           ADSL2+us Interlv delay           0 ds Interlv delay           0 Estimated loop length: 8088 feet (bridge tap)Framing Mode:          FULL OVERHEAD WITH SYNC Errored seconds            0 Severely Err Sec           0usRate                   943 dsRate                  3627usLOS_errors               0 dsLOS_errors               0usRdiErrors                0 SEF_errors                 0usSuperFrmCnt        6844774 dsSuperFrmCnt        6844774usICRC_errors              0 dsICRC_errors              0usFCRC_errors            344 dsFCRC_errors              0usIFEC_errors              0 dsIFEC_errors              0usFFEC_errors              0 dsFFEC_errors              0usINCD_error               0 dsINCD_error               0usFNCD_error               0 dsFNCD_error               0usILCD_errors              0 dsILCD_errors              0usFLCD_errors              0 dsFLCD_errors              0usIHEC_errors              0 dsIHEC_errors              0usFHEC_errors            340 dsFHEC_errors              0usIdle_count0      237365169 dsIdle_count0      927383586usIdle_count1              0 dsIdle_count1              0usPdu_count0               0 dsPdu_count0               0usPdu_count1               0 dsPdu_count1               0usAtm_count0        21551655 usAtm_count1               0dsGood_count0       68105270 dsGood_count1              0dsBadHec_count0            0 dsBadHec_count1            0dsOVFDrop_count0           0 dsOVFDrop_count1           0 ATM port status    : UpRx data rate (bps) : 3627Tx data rate (bps) : 943 ATM Virtual Circuits: VCC #  Type  VPI   VCI   Encapsulation-----  ----  ---  -----  --------------------------  1     PVC    0     35  PPP over Ethernet (LLC/SNAP encapsulation) ATM Circuit Statistics: VCC-1   Rx Frames     :    3695172           Tx Frames     :    3046580  Rx Octets     : 3198579000           Tx Octets     : 1051289227  Rx Errors     :          0           Tx Errors     :          0  Rx Discards   :          0           Tx Discards   :     174581        Crc Errors:           0        Len Errors:           0      Abort Errors:           0      Starv Errors:           0       DmaLenErrors:           0         TxMisQCnt:           0         RxMisQCnt:           0          TxEOQCnt:       45802          RxEOQCnt:           0 RxPacketsServiced:     3695172 TxPacketsServiced:       45802     RxMaxServiced:          13     TxMaxServiced:           1           RxTotal:     3695172           TxTotal:     2871998            RcbPool:  0x00000000   RxActQueueCount: -   3695172    RxActQueueHead:  0x948684f0    RxActQueueTail:  0x94868530          RxActive:           1          RcbStart:  0x94868228 RxTeardownPending:           0           TcbPool:  0x948675a0   TxActQueueCount:           0    TxActQueueHead:  0x00000000    TxActQueueTail:  0x948675a0          TxActive:           0          TcbStart:  0x948669f8 TxTeardownPending:           0          RxBufSize:        1664    RxBufferOffset:           0      RxNumBuffers:          16      RxServiceMax:          16      TxNumBuffers:          64       TxNumQueues:           2      TxServiceMax:          64            CpcsUU:           0               Gfc:           0               Clp:           0               Pti:           0            DaMask:           0          Priority:           2           PktType:           0               Vci:          35               Vpi:           0          CellRate:       28102           QosType:           2               Mbs:           8               Pcr:           1Wireless Interface is disabled.

2/17/09 10:45:47 AM L3      BOOT: Warm start v7.7.4 ----------------------------------2/17/09 10:45:47 AM L3       2/17/09 10:45:47 AM L3      IP address server initialization complete 2/17/09 10:45:47 AM L3      HB: heartbeat service initializing2/17/09 10:45:47 AM L3      HB: heartbeat option disabled2/17/09 10:45:47 AM L4      BR: Using saved configuration options2/17/09 10:45:47 AM L4      BR: Netopia SOC OS version 7.7.4 (build r1)2/17/09 10:45:47 AM L4      BR: Netopia-3000/24533572 (Netopia-3000, rev 1), PID 12252/17/09 10:45:47 AM L4      BR: last install status: 2/17/09 10:45:47 AM L4      BR: memory sizes - 4096K Flash, 16384K RAM2/17/09 10:45:47 AM L3      BR: Starting kernel2/17/09 10:45:47 AM L3      AAL5: initializing service2/17/09 10:45:47 AM L4      ATM: Waiting for PHY layer to come up2/17/09 10:45:47 AM L3      POE: Initializing PPP over Ethernet service2/17/09 10:45:47 AM L4      POE: Binding to Ethernet (ether/vcc1)2/17/09 10:45:47 AM L3      BRDG: Configuring port (10/100BT-LAN)2/17/09 10:45:47 AM L3      BRDG: Bridge not enabled for WAN.2/17/09 10:45:47 AM L3      BRDG: Bridging from one WAN port to another is disabled2/17/09 10:45:47 AM L3      BRDG: Initialization complete2/17/09 10:45:47 AM L4      IP: Routing between WAN ports is disabled2/17/09 10:45:47 AM L4      IP: IPSec client pass through is enabled2/17/09 10:45:47 AM L4      IP: Address mapping enabled on interface PPP over Ethernet vcc12/17/09 10:45:47 AM L4      IP: Stateful Inspection enabled on interface PPP over Ethernet vcc12/17/09 10:45:47 AM L3      IP: Adding default gateway over PPP over Ethernet vcc12/17/09 10:45:47 AM L3      IP: Initialization complete2/17/09 10:45:47 AM L3      IPSec: initializing service2/17/09 10:45:47 AM L3      IPSec: service is disabled2/17/09 10:45:47 AM L3      PPP: PPP over Ethernet vcc1 binding to PPPoE2/17/09 10:45:47 AM L3      PPP: PPP over Ethernet vcc1 Port listening for PPP requests2/17/09 10:45:47 AM L3      BRDG: (10/100BT-LAN) Port Physical Link Active2/17/09 10:45:47 AM L3      IP: (10/100BT-LAN) Ethernet Physical Link Active2/17/09 10:45:47 AM L3      IP: (10/100BT-LAN) IP Protocol Up2/17/09 10:45:47 AM L3      RIP: initializing2/17/09 10:45:47 AM L3      DHCP: Initializing Service2/17/09 10:45:47 AM L3      DHCP: Setup Server On UDP Port 672/17/09 10:45:47 AM L3      DHCP: Setup Client On UDP Port 682/17/09 10:45:47 AM L3      DNS: initializing service2/17/09 10:45:47 AM L4      DNS: nameserver address is 0.0.0.02/17/09 10:45:47 AM L3      SNMP: initializing service over UDP2/17/09 10:45:47 AM L3      DIA: Diagnostics service initializing2/17/09 10:45:47 AM L3      FW: initializing service2/17/09 10:45:47 AM L3      FW: Firewall service is disabled2/17/09 10:45:47 AM L3      SSL: Initializing Service2/17/09 10:45:47 AM L3      SSL: Installed Verisign, Equifax & Thawte Root CA certificates2/17/09 10:45:47 AM L3      SSL: Initialization Success2/17/09 10:45:47 AM L3      UPnP: Initialization complete2/17/09 10:45:48 AM L3      LHD: IP  192.168.1.1, MAC 00-1d-d8-27-3b-702/17/09 10:45:48 AM L3      LHD: Interface  Eth 100BT, State online2/17/09 10:45:48 AM L3      LHD: IP  192.168.1.2, MAC 00-1d-7e-bb-30-d92/17/09 10:45:48 AM L3      LHD: Interface  Eth 100BT, State online2/17/09 10:45:48 AM L3      LHD: IP  192.168.1.8, MAC 00-1a-92-9d-60-042/17/09 10:45:48 AM L3      LHD: Interface  Eth 100BT, State online2/17/09 10:47:08 AM L4      RFC1483-1 up 2/17/09 10:47:13 AM L3       AC-Name=NKGS-JNE2/17/09 10:47:13 AM L3       Host-Uniq 000000012/17/09 10:47:13 AM L3       Service-Name=ANY2/17/09 10:47:13 AM L3       AC-Cookie 213A6EAA657969848FDDE3EC8D3DE8952/17/09 10:47:17 AM L3      lcp: LCP Send Config-Request+2/17/09 10:47:17 AM L3       MRU 0x5d4+ MAGIC 0x9604d051+2/17/09 10:47:17 AM L3      lcp: LCP Recv Config-Req:+2/17/09 10:47:17 AM L3       MRU(1492) (ACK) AUTHTYPE(c023) (PAP) (ACK) MAGICNUMBER2/17/09 10:47:17 AM L3      (18c6098d) (ACK)2/17/09 10:47:17 AM L3      lcp: returning Configure-Ack2/17/09 10:47:17 AM L3      pap: received Authenticate-Ack, id 12/17/09 10:47:17 AM L3      pap: Remote message: 2/17/09 10:47:17 AM L3      ipcp: IPCP Config-Request+2/17/09 10:47:17 AM L3       ADDR(0x0) DNS(0x0) DNS2(0x0) WINS(0x0) WINS2(0x0)2/17/09 10:47:17 AM L3      ipcp: IPCP Config-Request+2/17/09 10:47:17 AM L3       ADDR(0x0) DNS(0x0) DNS2(0x0)2/17/09 10:47:17 AM L3      ipcp: IPCP Config-Request+2/17/09 10:47:17 AM L3       ADDR(0x4ade6bee) DNS(0xd8da5da5) DNS2(0xd8da5da6)2/17/09 10:47:17 AM L3      ipcp: IPCP Recv Config-Req:+2/17/09 10:47:17 AM L3       ADDR(216.218.64.30) (ACK)2/17/09 10:47:17 AM L3      ipcp: returning Configure-ACK2/17/09 10:47:17 AM L3      ipcp: negotiated remote IP address 216.218.64.302/17/09 10:47:17 AM L3      ipcp: negotiated IP address 74.222.107.2382/17/09 10:47:17 AM L3      ipcp: negotiated TCP hdr commpression off2/17/09 10:47:23 AM L3      NTP: Update system date & time 2/17/09 10:47:26 AM L4      TR-069: Resolving ACS URL - Retry 02/17/09 10:47:26 AM L4      TR-069: ACS URL resolved2/17/09 10:47:26 AM L3      TR-069: Connect to 192.31.222.52 Retry 02/17/09 10:47:26 AM L3      SSL: Handshake Success2/17/09 10:47:26 AM L3      SSL: Connect Success: s1.netopiatr069.net2/17/09 10:47:26 AM L3      SSL: Certificate Verify Success: s1.netopiatr069.net2/17/09 10:47:27 AM L3      TR-069: Post Inform - reason 1 BOOT 2/17/09 10:47:27 AM L3      TR-069: Server auth challenge received2/17/09 10:47:27 AM L3      TR-069: Closing connection on HTTP 2042/17/09 10:47:27 AM L3      SSL: Closing Connection: s1.netopiatr069.net

Lets see if we can weed out a problem.
]]> http://www.dslreports.com/forum/remark,21938161 Wed, 18 Feb 2009 19:08:57 EDT config suggestions for netopia 3347-02? http://www.dslreports.com/forum/remark,21937346 anon : Hi everyone,

I just bought a 3347-02 for my new DSL line with TekSavvy, and I've been getting horrendous downstream numbers like this:

I called Tech Support and apparently my line is spotless. They suggested that I try another modem, so I've switched my modem for another one (same make and model) and I still get these kinds of numbers.

I'm guessing that I have some config problems. Anyone have any suggestions? I've taken down my firewall, closed all browsers and P2P.

Thank you!]]> http://www.dslreports.com/forum/remark,21937346 Wed, 18 Feb 2009 16:37:32 EDT