http://www.dslreports.com/forum/r22014773 en Fri, 27 Nov 2009 14:22:08 EDT Fri, 27 Nov 2009 14:22:08 EDT http://www.dslreports.com/forum/remark,22021823 stevebg42 : I want to use this Efficient 5851 as a bridge and enable this on the router ,so its like a "dumb" modem.]]> http://www.dslreports.com/forum/remark,22021823 Thu, 05 Mar 2009 18:52:05 EDT http://www.dslreports.com/forum/remark,22019078 anon : Do you want to enable bridging on the router, or do you want to use the equipment as a bridge (ie as if it was a modem)?]]> http://www.dslreports.com/forum/remark,22019078 Thu, 05 Mar 2009 11:41:06 EDT http://www.dslreports.com/forum/remark,22014773 stevebg68 : We took over a Efficient 5851 SDSL router from Paetec ISP for a customer and we want to put it in bridged mode which we did and then hook it to a Cisco ASA 5505 firewall then to their LAN but its not working for us?

They have it set this way before we tried the bridged mode:

IP Routing enabled

using RFC 1483 with a manual WAN IP and subnet mask

NAT enabled

LAN IP: 192.168.1.1 255.255.255.0

Any suggestions to try in the settings to get it to work in bridge mode?

Do we need a cross over cable maybe from the Efficient 5851 router to the Cisco ASA ?

thanks]]> http://www.dslreports.com/forum/remark,22014773 Wed, 04 Mar 2009 17:04:56 EDT