dslreports logo
 
    All Forums Hot Topics Gallery
spc
uniqs
2

dbmaven
There's no shortage
Mod
join:1999-10-26
Sty in Sky

2 edits

dbmaven to ptrowski

Mod

to ptrowski

Re: [VoIPo] DTMF tones galore....

You may have posted it - but what router/firmware?

I'm working through some weirdness with support that has only been happening with the PAP2, not the GS502 - and the deeper we get the more I'm beginning to think it's a problem with the router/firmware. I could be completely off-base - and we'll keep diving deeper with it.

My setup:
Cablevision/OOL Motorola SBV5120 cable modem provisioned 30 down/5 up
Linksys WRT610N firmware 1.00.02 B10
PAP2T (or GS502) hangs directly off a wired port on the router.
D-Link 8 Port Gig-E switch for other wired devices

On the router, I have SPI Firewall disabled (it used to be enabled pre-January and the 502 worked fine)
Port Forwarding ports 5060-5081 (in case ports need to be changed) to the PAP2T
No QOS (don't really need it with 30/5 )
No port-triggering or DMZ (although when using the 502 I put it in the DMZ)

ptrowski
Got Helix?
Premium Member
join:2005-03-14
Woodstock, CT

ptrowski

Premium Member

It is a WRT54G v4 running the most recent version of Tomato.
me1212
join:2008-11-20
Lees Summit, MO

1 edit

me1212

Member

If the router is working correctly, I can say that the router and ATA r compatible, I use the wrt54g too..

burris
Premium Member
join:2000-08-22
Palm Beach Gardens, FL

burris to ptrowski

Premium Member

to ptrowski
said by ptrowski:

It is a WRT54G v4 running the most recent version of Tomato.
Been there, done that and with a Linksys and I wondered why.

Again, I would try it default..out of the box-just to see what happens.

ptrowski
Got Helix?
Premium Member
join:2005-03-14
Woodstock, CT

ptrowski

Premium Member

said by burris:
said by ptrowski:

It is a WRT54G v4 running the most recent version of Tomato.
Been there, done that and with a Linksys and I wondered why.

Again, I would try it default..out of the box-just to see what happens.
I can, but the issue is I have another one down stairs set up in bridge mode with the xbox 360 and Directv connected to it that was a witch to configure. So I may just try to buy a new one and do that.

burris
Premium Member
join:2000-08-22
Palm Beach Gardens, FL

burris

Premium Member

Buy is somewhere that will take it back with no restocking charge.

ptrowski
Got Helix?
Premium Member
join:2005-03-14
Woodstock, CT

ptrowski

Premium Member

said by burris:

Buy is somewhere that will take it back with no restocking charge.
True. I just don't see how the router can be faulty when the 502 worked like a champ except for the dropped registration. All of these issues really started after the 502 was swapped out. At this point I may take a dropped registration or two so I don't have 2-3 other issues.
me1212
join:2008-11-20
Lees Summit, MO

me1212

Member

You may be able to get a working GS ATA, if you pay for all the shipping.
slow mo
join:2002-03-19
USA

slow mo to ptrowski

Member

to ptrowski
said by ptrowski:

said by burris:

Buy is somewhere that will take it back with no restocking charge.
True. I just don't see how the router can be faulty when the 502 worked like a champ except for the dropped registration. All of these issues really started after the 502 was swapped out. At this point I may take a dropped registration or two so I don't have 2-3 other issues.
Did you rule out a faulty PAP2T? Linksys has its % as well, smaller maybe.
jay_rm
join:2002-04-12
Netville

jay_rm to ptrowski

Member

to ptrowski
said by ptrowski:

It is a WRT54G v4 running the most recent version of Tomato.
FWIW, I'm running a Buffalo router with Tomato V1.23 - no issues. The router manufacturer shouldn't be in play - if the hardware boots up, it's simply a platform for the Linux code.
dcm
join:2008-09-12
Pennsylvania

dcm to ptrowski

Member

to ptrowski
said by ptrowski:

I just don't see how the router can be faulty when the 502 worked like a champ except for the dropped registration. All of these issues really started after the 502 was swapped out.
Stupid question, but is the PAP2 plugged into the same LAN port that you used for the 502? Have you tried other LAN ports? Other cables?

montano
join:2001-04-29
Central Cali

montano to ptrowski

Member

to ptrowski
said by ptrowski:

It is a WRT54G v4 running the most recent version of Tomato.
I'd be willing to bet that Tomato is causing some of your issues. I used it for the last few years without ever having any problems. Updated from v19 to v23 and it seemed like I had problems non-stop. Tried going down to v22, still had issues.

Just for sh!ts and giggles, I switched to DD-WRT and all my issues have vanished.

Just my .0000000002 cents

unknvoip
RIP goose
Premium Member
join:2006-07-25
Rochester, NY

unknvoip

Premium Member

said by montano:

I'd be willing to bet that Tomato is causing some of your issues......
Ptrowski,

On the chance that you issues are related to the version of Tomato you are running, you might want to try V21. That is the version I am running and I know you know how well my setup has been running.

I forget why I didn't try V22 or 23 when they came out, but I think I remember hearing of some issues.

There has got to be a logical explanation.

burris
Premium Member
join:2000-08-22
Palm Beach Gardens, FL

burris

Premium Member

Unless one is a glutton for punishment, I don't know how anyone can do proper troubleshooting unless they strip down to the core and work from there.
Otherwise you are beating your head against the wall.

Computers are evil..