steffmo1
join:2009-03-07
| P-2602HWT-F3 firmware Ive had a lots of problems with my P-2602HWT-F3 lately.. And i was thinking if there's any new firmware.
Current firmware: ZyNOS Firmware Version: V3.70(ASC.1) | 12/19/2008
And if there are. Where do i get the new? Since i cant find any on the official Zyxel website. | |
|
 dslpartner
join:2005-02-18 | Re: P-2602HWT-F3 firmware That is a special Telenor version, so there is no public firmware.
What kind of problems have you experienced with it?
--
"Perl is executable line noise, Python is executable pseudo-code."
| |
|
steffmo1
join:2009-03-07
| I know its a special Telenor version. Ive contacted Telenor, but they say that they have nothing to do with the firmware.
Ive had problems with losing signal to the dsl line. And then i have to do a restart of the device. Usually does it once a day. Had no problems with that earlier. So i changed router. Didn't lose signal. At all.
It also wont port forward as it should. | |
|
Zyxel Norway
@nextgentel.com
| There is no public firmware for that unit. The firmware you have is not a release firmware but rather a early beta and you should probably not have it in the first place.
If you contact me by email I might be able to help you. My email is : mr at zyxel dot no. | |
|
Same router
@online.no
| I have the same router, have i known that this is a crappy telenor version i would not ordered it. shit...
I experience unstable download speed, sometimes it getts up to 1mb/s, but usual its 20-50kb/s..
Is this some crap, or is it a ok router?
Why are the download speed so unstable? And why dont telenor make a better firmware..
Getting pissed.. | |
|
 | dslpartner
join:2005-02-18
| Re: P-2602HWT-F3 firmware said by Same router :
I have the same router, have i known that this is a crappy telenor version i would not ordered it. shit...
I experience unstable download speed, sometimes it getts up to 1mb/s, but usual its 20-50kb/s..
Is this some crap, or is it a ok router?
Why are the download speed so unstable? And why dont telenor make a better firmware..
Getting pissed..
I got the same router, but not using the DSL interface just the Ethernet and have noe problems with downloads.
Which FW version is on your device? | |
|
me again
@online.no | ZyNOS Firmware Version: V3.70(ASC.1) | |
|
dslpartner
join:2005-02-18
| Same as steff, lets hope he gets a new firmware that works better and will report back here.
Its not Telenor that creates the firmwares, that is ZyXEL.
What kind of connections are you guys using the device with?
I got mine connected to a cable modem with a 24/3 connection and doing iperf tests I get 90 mbps throughput with the device, but that is with a wired connection and not wireless.
--
"Perl is executable line noise, Python is executable pseudo-code."
| |
|
dslpartner
join:2005-02-18
| There are newer ones available.....
| |
|
Me again
@online.no
| I have telenor turbo. Adsl 2 16Mb/s down and 800Kb/s up (i think its called) According to the modem the line is 14Mbs and 804Kps, but that the line.
I use wireless now, and its some what unstable. The speed is unstable, and the signal strength is unstable. Even when the pc,ps3 is a few meters from the router.
Where can I download the firmware you show on the last post?  | |
|
| dslpartner
join:2005-02-18
| Re: P-2602HWT-F3 firmware I just got telnet access to some devices, I do not have the firmwares available.
Have you tried contacting ZyXEL Norway? One representative posted his email address in this thread so people could get in touch with them.
--
"Perl is executable line noise, Python is executable pseudo-code."
| |
|
dslpartner
join:2005-02-18
| I just got a FW from ZyXEL (just send an email to mr(at)zyxel.no) and have upgraded my device, but since I had no problems before, I do not expect to see any change.
--
"Perl is executable line noise, Python is executable pseudo-code."
| |
|
Spawn32
join:2009-05-29
1 edit | Hi, would someone please be so kind to share the latest FW update they have with me, got my P2602HWT to day and it has a realy old FW V3.70(ASC.0) | 10/03/2008, Bridge isent included and Port forwading dosen work (gives an error when saving) zyxel.no has a long weekend vacation at the moment, so sending and email wont help me for some days :/
my email: spawn3232(at)hotmail.com
Best regards
Spawn | |
|
| dslpartner
join:2005-02-18 | Re: P-2602HWT-F3 firmware Send an email anyway, you never know, somebody there might read their email.
--
"Perl is executable line noise, Python is executable pseudo-code."
| |
|
| | Spawn32
join:2009-05-29 | Re: P-2602HWT-F3 firmware sendt one last morning, no answer yet  could you help me out ? | |
|
| dslpartner
join:2005-02-18 | What kind of error do you get when you try to do port forwarding and how do you exactly do it?
What do you mean by bridge is not included?
--
"Perl is executable line noise, Python is executable pseudo-code."
| |
|
Teledude
@online.no | What about making a link, so we can download the firmware? | |
|
TimZy
@online.no | Hi! I have the ZyXEL p-2602hwt, but i can't find any specific instructions on how to forward a port for this router. I'm checking with the PFPortChecker by Portforward.com.
Does anyone know of any instructions for this router, please? | |
|
| |
| |
TimZy
@online.no
| Re: P-2602HWT-F3 firmware Thanks alot yourfriend! Is the firmware official, and do I need the firmware to forward ports correctly? And one more question; do I need a static ip adress to set up ports? Because I've tried everything, and I can't make on. | |
|
| | | yourfriend
join:2009-06-22
| Re: P-2602HWT-F3 firmware What do you mean by "official"? This firmware is refered to by zyxel support. This firmware made portforwarding work om my router. Portforwarding apparently did not work with the out-of-the-box firmware (dated something like 03/2008). It also fixed some logon issues and improved the performance of the webgui.
Portforwarding: The common way is giving the lan pc that you want to forward traffic to, a static ip. The router ip needs not to be static. Remember to also open the router firewall for traffic to the correct port/port range by configuring a firewall rule, see
»moya.zyxel.no/multimodem/NAT_v01.pdf | |
|
|
|
|
