Search:  

 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Up and Running » IPv6 » How to create v4 over v6 tunneling on SOLARIS??
Search Topic:
Uniqs:
809
Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
AuthorAll Replies
-

mkt

join:2002-12-04
Kaukauna, WI
reply to Ankita
Re: How to create v4 over v6 tunneling on SOLARIS??

Check out this blog entry from a Sun Employee

»blogs.sun.com/DanX/entry/solaris···el_setup


Ankita

@airtelbroadband.in
reply to justbits
Thank you for your reply.But the command you have suggessted is not working.I am getting an error like "Cannot assign the requested address".


justbits
More fiber than ATT can handle
Premium
join:2003-01-08
Chicago, IL

1 edit
reply to Ankita
Try the commands shown in "Configuring IPv4/IPv6 Tunnels" at
»docs.sun.com/app/docs/doc/816-51···m?a=view


Ankita

@airtelbroadband.in

Hi All,

My requirement is to create a v4overv6 tunnel on both solaris machines and need to access one machine from another
For this, I am trying to create a v4 over v6 tunnel on Solaris. Can I get the exact information regarding it. Here, I am putting few trails I did so far.

1.) Initially I tried creating v6 over v4 tunnels with the following commands and worked out:
ifconfig ip.tun1 inet6 plumb
ifconfig ip.tun1 inet6 tsrc 192.168.2.4 tdst 192.168.2.6 up
ifconfig ip.tun1 inet6 addif fe80::a00:27ff:fe03:b9a4 fe80::a00:27ff:fe03:b9a4 up

I tried to use same kind of syntax to create v4 over v6 tunnel as well
ifconfig ip.tun1 inet6 plumb
ifconfig ip.tun1 inet6 tsrc fe80::a00:27ff:fe03:b9a4 tdst fe80::a00:27ff:fe03:b9a4 up
ifconfig ip.tun1 inet6 addif 192.168.2.4 192.168.2.6 up
But I am getting errors like this:-
ifconfig: fe80::a00:27ff:fe03:b9a4: bad address
ifconfig: 192.168.2.4: bad address

2.) I was trying to execute following command (which I got from google)
ifconfig ip6.tun1 inet plumb tsrc fe80::a00:27ff:fe03:b9a4 tdst fe80::a00:27ff:fe03:b9a4 up
It has thrown the following error:-
ifconfig : Failure : ip6.tun1 : Cannot assign requested address.

3.) I also tried another command.
ifconfig ip6.tun1 inet plumb 192.168.2.4 192.168.2.6 tsrc fe80::a00:27ff:fe03:b9a4 tdst fe80::a00:27ff:fe03:b9a4 up
It has thrown the same error but has assigned the IPv4 address:-
ifconfig : Failure : ip6.tun1 : Cannot assign requested address.

Please do the needful.

Thanks in Advance.
Ankita Kumari
Forums » Up and Running » IPv6


Monday, 30-Nov 03:37:40 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.republican-creole
page compression OFF
Most commented news this week
· [124] Time Warner Cable Fires Broadside At Broadcasters
· [112] New AT&T Ad Campaign Hits Back At Verizon
· [96] Apple Joins AT&T Verizon Snark Fest
· [87] New Bill Takes Aim At Higher Verizon ETFs
· [82] Weekend Open Thread
· [80] TiVo Sees Record Customer Losses
· [79] Verizon CEO: Hulu Will Be Dead Soon
· [69] In-Flight Internet Headed For Bumpy Landing?
· [63] Thanksgiving Open Thread
· [41] ICANN Slams DNS Redirection
Most people now reading
· Are GPS's better today? [General Questions]
· Windows 7 boot manager editing questions [Microsoft Help]
· [Newsgroups] Newzleech down? [Filesharing Software]
· Is Easynews down? [Filesharing Software]
· [How to] Install Asterisk on an Asus WL-520GU router [VOIP Tech Chat]
· [ PVP] 3.2 DK PvP D/W Spec... [World of Warcraft]
· Considering Leaving Vonage, who should I Consider? [VOIP Tech Chat]
· Grey Cup on the Web? [Canadian Chat]
· Netgear WNDR3700 [Comcast HSI]
· Evading throttling with uTP / uTorrent 1.9a [TekSavvy]