Web Server - dslreports.com

Doctor Olds I Need A Remedy For What's Ailing Me. Premium,VIP join:2001-04-19 1970 442 W30 clubs:	reply to SamStar Re: Web Server Only your ISP can tell you how to setup your 4200 for their connection. I doubt you specify your Public IP in the Modem as Most ISPs assign your IP by your PPPoE or PPPoA login credentials. If you ordered a Static WAN IP, they just give you the same IP automatically based on your username/password in their system, but you will have to ask them to be 100% sure. Everything else is answered below. »portforward.com/help/pfprogression.htm »www.portforward.com/english/rout···ndex.htm »www.portforward.com/english/rout···HTTP.htm »Efficient Networks Forum FAQ »I'm trying to run a Server and I get the Router page instead of my Server? Regards, Doctor Olds -- What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?
	to forum · permalink · · 2009-04-12 10:20:27 ·
SamStar @com.au	I am trying to setup a web server. have the following: My Desktop running XP with IIS enabled and it will be the web server. Speedstream 4200 modem /Router Static IP address I don't wish to register a domain name yet. I want to get the server up and running using my Static IP address. I also would like to keep my private IP addresses for security reasons becuase I have 4 machines on my LAN. My question is where do I configure my static IP on my SpeedStream Router ( if yes where abouts) or do I configure it on my server? If I configure it on my server and my static IP starts with 60.240.****. how do i route the traffic to my web server if it has a private address of say 192.168.0. Do I need to forward any ports? Your help is much appreciated.
	to forum · permalink · 2009-04-12 08:44:04 ·


Wednesday, 09-Dec 07:32:47	Terms of Use \| Privacy Policy \| Hosting by www.nac.net - DSL,Hosting & Co-lo \| feedback \| contact over 10 years online! © 1999-2009 dslreports.com. republican-creole page compression OFF