http://www.dslreports.com/forum/r22223566 en Tue, 01 Dec 2009 14:24:04 EDT Tue, 01 Dec 2009 14:24:04 EDT http://www.dslreports.com/forum/remark,22223805 Doctor Olds : Only your ISP can tell you how to setup your 4200 for their connection. I doubt you specify your Public IP in the Modem as Most ISPs assign your IP by your PPPoE or PPPoA login credentials. If you ordered a Static WAN IP, they just give you the same IP automatically based on your username/password in their system, but you will have to ask them to be 100% sure.

Everything else is answered below.

»portforward.com/help/pfprogression.htm

»www.portforward.com/english/rout···ndex.htm

»www.portforward.com/english/rout···HTTP.htm

»Efficient Networks Forum FAQ »I'm trying to run a Server and I get the Router page instead of my Server?

Regards,

Doctor Olds
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?]]> http://www.dslreports.com/forum/remark,22223805 Sun, 12 Apr 2009 10:20:27 EDT http://www.dslreports.com/forum/remark,22223566 anon : I am trying to setup a web server. have the following:

My Desktop running XP with IIS enabled and it will be the web server.
Speedstream 4200 modem /Router
Static IP address

I don't wish to register a domain name yet. I want to get the server up and running using my
Static IP address. I also would like to keep my private IP addresses for security reasons becuase I have 4 machines on my LAN.

My question is where do I configure my static IP on my SpeedStream Router ( if yes where abouts) or do I configure it on my server?

If I configure it on my server and my static IP starts with 60.240.*****. how do i route the traffic to my web server if it has a private address of say 192.168.0.*
Do I need to forward any ports?

Your help is much appreciated.]]> http://www.dslreports.com/forum/remark,22223566 Sun, 12 Apr 2009 08:44:04 EDT