Equipment Support > Hardware By Brand > Buffalo Tech > [General] WHR 125G + tomato setup help

[General] WHR 125G + tomato setup help

reply to spy king
hey!

yes.. I have done that.. I am able to ping the router when I do that but can't access the net.. what should I set as the gateway? the router Ip?

Also I managed to do point 2 through the scheduler+ "service wan start/stop" command..

Yes gateway setting on computer should be router IP.
--
My grandkids ARE cuter than yours!

reply to spy king
Hey.. set it as 192.168.1.1 .. still no luck..

This is my current set up
WAN:
Connection Type PPPoE
IP Address 59.92.66.21
Subnet Mask 255.255.255.255
Gateway 59.92.64.1
DNS 208.67.222.222, 208.67.220.220

LAN:
Router IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP 192.168.1.22 - 192.168.1.60

When I set the computers Ip to
192.168.1.10
255.255.255.0
192.168.1.1

I am only able to ping the router.. not able to access the net..

Under pppoe double check the user, pass, and service names. Then try cold boot in series. With every computer, router and modem off, start modem then router then computer('s), waiting for all lights to finish flashing before starting the next.
--
My grandkids ARE cuter than yours!

reply to spy king
What modem are you useing?

reply to spy king
Hey..

no luck.. tired cold booting ( like you said ) still no luck..

The modem is a SmartAX Mt882 (it came with my DSL connection)

The funny thing is when I set my manual IP, I then log into the router.. and then taking the external IP, I'm able to ping it.. along with the modem "gateway"...

Your "modem" is a router. I don't believe you can run one router behind another. You may have to set mode to router in order for this to work, under advanced- routing- misc.- mode.
--
My grandkids ARE cuter than yours!

Oh.. I clean forgot!!

So now I have to set the "modem" router to what mode? I shall just check the options available and get back to ya!

It would be nice if you guys posted back to let us know if you're good to go now.
--
My grandkids ARE cuter than yours!

Hey.. Really sorry.. I haven't been feeling to well.. I'll connect my "router" modem directly and check right now..

reply to PeeWee
I'm even more confused now.. let me try and explain..

Modem: Smartax MT882 running original Fw. It's in Pure Bridge mode.





Now do I keep it in pure bridge or routed mode? if routed what IP should I add?

When I set my wifi router Router mode from gateway, I wasn't able to connect to the net..

My main aim is to assign my machine a Static IP and still have the router assign Ip's via DCHP to other machines that connect to it..
secondary aim would be to be able to log into the Modem admin page..

Thanks..!

reply to spy king

Damn. I feel like such an idiot. How could I have missed something so stupid? :|

It works flawlessly now.. thanks!

two more quick tomato based questions..

1.Is there anyway I can send commands to the router from my system?

I basically want one script that when run connects WAN and another when run disconnects WAN..

2. Is there anyway I can access my modem's Webadmin page from behind the router?

Thanks!

I just managed to connect to my modem admin page using IPtables

now only for WAN connect/disconnect from the computer, that is without having to login to the router admin page and click on connect/disconnect... Basically cause my DSL line is a capped line and I don't want to be always connected to the net..

Hey!
All done

thanks a lot for all the help

PS: Used a telnet script to start the wan service and stop the wan service..

reply to spy king
Hello!

Would there be any page where I can see the list of commands I can run by telnet ing to the router?

I would like to change the WAN ppoe Username and password through a script..

Tks!