republican-creole
Search:  

 
theme to white backgroundlet page decide theme
HomeFind ServiceReviewsISP NewsFAQsForumsToolsDatabaseAbout 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Equipment Support » Hardware By Brand » Buffalo Tech » [General] WHR 125G + tomato setup help
Uniqs:
1142		 Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Links: ·Forum FAQ ·Buffalo Home ·Support ·Firmware ·Products
[General] TOMATO Qos TESTING »
spy king

join:2009-04-13

[General] WHR 125G + tomato setup help

Hello!
I'm a total noob here so pl bear with me

I have a need few inputs on how to the do the following using a G125 running tomato 1.23ND

1) How do I assign a static Ip to my computer that is connected to the LAN port of the router?
When I manually enter the IP as 192.168.1.xx subnet 255.255.255.0 , I am able to ping the router (192.168.1.1) but am unable to access the net through the WAN. Only when I set it to automatically obtain IP am I able to connect to the WAN.

2) How do I configure the Router to schedule a Connect/Disconnect of the WAN(modem) at a particular time? Script on the router or from the computer?

3) Is there any way I can set the up the network in such a way that I can access the LAN automatically, But have to Dial to access the WAN(net)?

Thanks in advance
permalink · 2009-04-13 13:05:07 · Print · Reply to this

PeeWee
Premium
join:2001-10-21
Clovis, CA
clubs:
·Pacific Bell - SBC
·Comcast

1 edit

Re: [General] WHR 125G + tomato setup help

Click for full size
I'm on a different router but the static ip setup should be the same. Have you set it up as in the picture?
--
My grandkids ARE cuter than yours!
permalink · 2009-04-14 21:32:40 · Print · Reply to this
spy king

join:2009-04-13

 hey!

yes.. I have done that.. I am able to ping the router when I do that but can't access the net.. what should I set as the gateway? the router Ip?

Also I managed to do point 2 through the scheduler+ "service wan start/stop" command..
permalink · 2009-04-15 13:13:30 · Reply to this

PeeWee
Premium
join:2001-10-21
Clovis, CA
clubs:

Re: [General] WHR 125G + tomato setup help

Yes gateway setting on computer should be router IP.
--
My grandkids ARE cuter than yours!
permalink · 2009-04-15 13:40:29 · Reply to this
spy king

join:2009-04-13

 Hey.. set it as 192.168.1.1 .. still no luck..

This is my current set up
WAN:
Connection Type PPPoE
IP Address 59.92.66.21
Subnet Mask 255.255.255.255
Gateway 59.92.64.1
DNS 208.67.222.222, 208.67.220.220

LAN:
Router IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP 192.168.1.22 - 192.168.1.60

When I set the computers Ip to
192.168.1.10
255.255.255.0
192.168.1.1

I am only able to ping the router.. not able to access the net..
permalink · 2009-04-16 09:55:14 · Print · Reply to this

PeeWee
Premium
join:2001-10-21
Clovis, CA
clubs:
·Pacific Bell - SBC
·Comcast

Re: [General] WHR 125G + tomato setup help

Under pppoe double check the user, pass, and service names. Then try cold boot in series. With every computer, router and modem off, start modem then router then computer('s), waiting for all lights to finish flashing before starting the next.
--
My grandkids ARE cuter than yours!
permalink · 2009-04-16 16:36:55 · Reply to this
jza80

join:2005-10-29
Sacramento, CA

said by spy king See Profile :

When I set the computers Ip to
192.168.1.10
255.255.255.0
192.168.1.1

I am only able to ping the router.. not able to access the net..
Your missing DNS. You won't get anywhere without DNS.

permalink · 2009-04-25 04:43:46 · Print · Reply to this
spy king

join:2009-04-13

Re: [General] WHR 125G + tomato setup help

Damn. I feel like such an idiot. How could I have missed something so stupid? :|

It works flawlessly now.. thanks!

two more quick tomato based questions..

1.Is there anyway I can send commands to the router from my system?

I basically want one script that when run connects WAN and another when run disconnects WAN..

2. Is there anyway I can access my modem's Webadmin page from behind the router?

Thanks!
permalink · 2009-04-25 09:45:12 · Print · Reply to this
spy king

join:2009-04-13

Re: [General] WHR 125G + tomato setup help

I just managed to connect to my modem admin page using IPtables

now only for WAN connect/disconnect from the computer, that is without having to login to the router admin page and click on connect/disconnect... Basically cause my DSL line is a capped line and I don't want to be always connected to the net..
permalink · 2009-04-25 10:13:47 · Reply to this
spy king

join:2009-04-13

Re: [General] WHR 125G + tomato setup help

Hey!
All done

thanks a lot for all the help

PS: Used a telnet script to start the wan service and stop the wan service..
permalink · 2009-04-25 11:06:26 · Reply to this
rizsher

join:2002-01-31
Egypt

Re: [General] WHR 125G + tomato setup help

Click for full size
Instead of hard coding the static IP, you cna just use the Static DHCP function of Tomato to assign fixed IPs. Just make sure the Static IPs are outside of the DHCP Server "IP Address Range" you have specified under Basic-Network.

See attached screenshot.
permalink · 2009-04-26 08:43:11 · Print · Reply to this

PeeWee
Premium
join:2001-10-21
Clovis, CA
clubs:		 What modem are you useing?
permalink · 2009-04-16 21:38:01 · Reply to this
spy king

join:2009-04-13

 Hey..

no luck.. tired cold booting ( like you said ) still no luck..

The modem is a SmartAX Mt882 (it came with my DSL connection)

The funny thing is when I set my manual IP, I then log into the router.. and then taking the external IP, I'm able to ping it.. along with the modem "gateway"...
permalink · 2009-04-18 10:36:42 · Reply to this

PeeWee
Premium
join:2001-10-21
Clovis, CA
clubs:
·Pacific Bell - SBC
·Comcast

Re: [General] WHR 125G + tomato setup help

Your "modem" is a router. I don't believe you can run one router behind another. You may have to set mode to router in order for this to work, under advanced- routing- misc.- mode.
--
My grandkids ARE cuter than yours!
permalink · 2009-04-18 11:45:16 · Reply to this
spy king

join:2009-04-13

Re: [General] WHR 125G + tomato setup help

Oh.. I clean forgot!!

So now I have to set the "modem" router to what mode? I shall just check the options available and get back to ya!
permalink · 2009-04-19 00:23:22 · Reply to this

PeeWee
Premium
join:2001-10-21
Clovis, CA
clubs:

Re: [General] WHR 125G + tomato setup help

It would be nice if you guys posted back to let us know if you're good to go now.
--
My grandkids ARE cuter than yours!
permalink · 2009-04-22 01:32:35 · Reply to this
spy king

join:2009-04-13

Re: [General] WHR 125G + tomato setup help

Hey.. Really sorry.. I haven't been feeling to well.. I'll connect my "router" modem directly and check right now..
permalink · 2009-04-25 02:05:21 · Reply to this
spy king

join:2009-04-13

 I'm even more confused now.. let me try and explain..

Modem: Smartax MT882 running original Fw. It's in Pure Bridge mode.





Now do I keep it in pure bridge or routed mode? if routed what IP should I add?

When I set my wifi router Router mode from gateway, I wasn't able to connect to the net..

My main aim is to assign my machine a Static IP and still have the router assign Ip's via DCHP to other machines that connect to it..
secondary aim would be to be able to log into the Modem admin page..

Thanks..!
permalink · 2009-04-25 02:36:58 · Print · Reply to this
spy king

join:2009-04-13

 Hello!

Would there be any page where I can see the list of commands I can run by telnet ing to the router?

I would like to change the WAN ppoe Username and password through a script..

Tks!
permalink · 2009-05-26 06:22:03 · Reply to this
Forums » Equipment Support » Hardware By Brand » Buffalo Tech[General] TOMATO Qos TESTING »

Sunday, 06-Dec 07:08:42 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [163] Comcast Releasing Promised Usage Meter
· [147] Avast Antivirus Has Gone Mad
· [128] Comcast Makes NBC Universal Acquisition Official
· [124] The Bandwidth Hog Does Not Exist
· [105] Graduate Student Unveils Sprint's GPS Sharing With Feds
· [101] Google Invades ISP, OpenDNS Turf With Google Public DNS
· [85] FCC Ponders Moving From PSTN To IP Voice
· [82] Latest Consumer Reports Survey Not Kind To AT&T
· [81] New Bill Aims To Limit ETFs
· [75] Sprint Defuses GPS Privacy Media Bomb
Most people now reading
· Windows 7 boot manager editing questions [Microsoft Help]
· Wife might have to work in.... Iowa for a few months!!! [General Questions]
· Enhancement Shaman + Heirlooms, what to pick? [World of Warcraft]
· Problems with rlslog.net? [TekSavvy]
· [DNS] Google's public DNS... performance increases? [Comcast HSI]
· False positive in Avast! or is it real? [Security]
· Is there any true cure for, or way to prevent, a hangover? [General Questions]
· First commercial tool to crack BitLocker arrives (Updated) [Security]
· [Newsgroups] Newzleech down? [Filesharing Software]
· [ PVP] 3.2 DK PvP D/W Spec... [World of Warcraft]