[General] WHR 125G + tomato setup help in Buffalo Tech http://www.dslreports.com/forum/r22228803 en Fri, 04 Dec 2009 03:22:31 EDT Fri, 04 Dec 2009 03:22:31 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22444145 spy king : Hello!

Would there be any page where I can see the list of commands I can run by telnet ing to the router?

I would like to change the WAN ppoe Username and password through a script..

Tks! :)]]> http://www.dslreports.com/forum/remark,22444145 Tue, 26 May 2009 06:22:03 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22297376 rizsher : Instead of hard coding the static IP, you cna just use the Static DHCP function of Tomato to assign fixed IPs. Just make sure the Static IPs are outside of the DHCP Server "IP Address Range" you have specified under Basic-Network.

See attached screenshot.
Click for full size
]]> http://www.dslreports.com/forum/remark,22297376 Sun, 26 Apr 2009 08:43:11 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22293935 spy king : Hey!
All done :)

thanks a lot for all the help :)

PS: Used a telnet script to start the wan service and stop the wan service.. ]]> http://www.dslreports.com/forum/remark,22293935 Sat, 25 Apr 2009 11:06:26 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22293814 spy king : I just managed to connect to my modem admin page using IPtables :)

now only for WAN connect/disconnect from the computer, that is without having to login to the router admin page and click on connect/disconnect... Basically cause my DSL line is a capped line and I don't want to be always connected to the net..]]> http://www.dslreports.com/forum/remark,22293814 Sat, 25 Apr 2009 10:13:47 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22293734 spy king : Damn. I feel like such an idiot. How could I have missed something so stupid? :|

It works flawlessly now.. :) thanks!

two more quick tomato based questions..

1.Is there anyway I can send commands to the router from my system?

I basically want one script that when run connects WAN and another when run disconnects WAN..

2. Is there anyway I can access my modem's Webadmin page from behind the router?

Thanks!]]> http://www.dslreports.com/forum/remark,22293734 Sat, 25 Apr 2009 09:45:12 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22293334 jza80 :
said by spy king See Profile :

When I set the computers Ip to
192.168.1.10
255.255.255.0
192.168.1.1

I am only able to ping the router.. not able to access the net..
Your missing DNS. You won't get anywhere without DNS. :p

]]> http://www.dslreports.com/forum/remark,22293334 Sat, 25 Apr 2009 04:43:46 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22293217 spy king : I'm even more confused now.. let me try and explain..

Modem: Smartax MT882 running original Fw. It's in Pure Bridge mode.





Now do I keep it in pure bridge or routed mode? if routed what IP should I add?

When I set my wifi router Router mode from gateway, I wasn't able to connect to the net..

My main aim is to assign my machine a Static IP and still have the router assign Ip's via DCHP to other machines that connect to it..
secondary aim would be to be able to log into the Modem admin page..

Thanks..!]]> http://www.dslreports.com/forum/remark,22293217 Sat, 25 Apr 2009 02:36:58 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22293166 spy king : Hey.. Really sorry.. I haven't been feeling to well.. I'll connect my "router" modem directly and check right now.. ]]> http://www.dslreports.com/forum/remark,22293166 Sat, 25 Apr 2009 02:05:21 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22276770 PeeWee : It would be nice if you guys posted back to let us know if you're good to go now.
--
My grandkids ARE cuter than yours! ;-)]]> http://www.dslreports.com/forum/remark,22276770 Wed, 22 Apr 2009 01:32:35 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22260218 spy king : Oh.. I clean forgot!!

So now I have to set the "modem" router to what mode? I shall just check the options available and get back to ya! :)]]> http://www.dslreports.com/forum/remark,22260218 Sun, 19 Apr 2009 00:23:22 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22257600 PeeWee : Your "modem" is a router. I don't believe you can run one router behind another. You may have to set mode to router in order for this to work, under advanced- routing- misc.- mode.
--
My grandkids ARE cuter than yours! ;-)]]> http://www.dslreports.com/forum/remark,22257600 Sat, 18 Apr 2009 11:45:16 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22257339 spy king : Hey..

no luck.. tired cold booting ( like you said ) still no luck..

The modem is a SmartAX Mt882 (it came with my DSL connection)

The funny thing is when I set my manual IP, I then log into the router.. and then taking the external IP, I'm able to ping it.. along with the modem "gateway"...]]> http://www.dslreports.com/forum/remark,22257339 Sat, 18 Apr 2009 10:36:42 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22249824 PeeWee : What modem are you useing?]]> http://www.dslreports.com/forum/remark,22249824 Thu, 16 Apr 2009 21:38:01 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22248028 PeeWee : Under pppoe double check the user, pass, and service names. Then try cold boot in series. With every computer, router and modem off, start modem then router then computer('s), waiting for all lights to finish flashing before starting the next.
--
My grandkids ARE cuter than yours! ;-)]]> http://www.dslreports.com/forum/remark,22248028 Thu, 16 Apr 2009 16:36:55 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22245627 spy king : Hey.. set it as 192.168.1.1 .. still no luck..

This is my current set up
WAN:
Connection Type PPPoE
IP Address 59.92.66.21
Subnet Mask 255.255.255.255
Gateway 59.92.64.1
DNS 208.67.222.222, 208.67.220.220

LAN:
Router IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP 192.168.1.22 - 192.168.1.60

When I set the computers Ip to
192.168.1.10
255.255.255.0
192.168.1.1

I am only able to ping the router.. not able to access the net..]]> http://www.dslreports.com/forum/remark,22245627 Thu, 16 Apr 2009 09:55:14 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22240878 PeeWee : Yes gateway setting on computer should be router IP.
--
My grandkids ARE cuter than yours! ;-)]]> http://www.dslreports.com/forum/remark,22240878 Wed, 15 Apr 2009 13:40:29 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22240728 spy king : hey!

yes.. I have done that.. I am able to ping the router when I do that but can't access the net.. what should I set as the gateway? the router Ip?

Also I managed to do point 2 through the scheduler+ "service wan start/stop" command..]]> http://www.dslreports.com/forum/remark,22240728 Wed, 15 Apr 2009 13:13:30 EDT Re: [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22237615 PeeWee : I'm on a different router but the static ip setup should be the same. Have you set it up as in the picture?
--
My grandkids ARE cuter than yours! ;-)
Click for full size
]]> http://www.dslreports.com/forum/remark,22237615 Tue, 14 Apr 2009 21:32:40 EDT [General] WHR 125G + tomato setup help http://www.dslreports.com/forum/remark,22228803 spy king : Hello!
I'm a total noob here so pl bear with me :)

I have a need few inputs on how to the do the following using a G125 running tomato 1.23ND

1) How do I assign a static Ip to my computer that is connected to the LAN port of the router?
When I manually enter the IP as 192.168.1.xx subnet 255.255.255.0 , I am able to ping the router (192.168.1.1) but am unable to access the net through the WAN. Only when I set it to automatically obtain IP am I able to connect to the WAN.

2) How do I configure the Router to schedule a Connect/Disconnect of the WAN(modem) at a particular time? Script on the router or from the computer?

3) Is there any way I can set the up the network in such a way that I can access the LAN automatically, But have to Dial to access the WAN(net)?

Thanks in advance :)]]> http://www.dslreports.com/forum/remark,22228803 Mon, 13 Apr 2009 13:05:07 EDT