Bell Speedstream 4200 unlock/flash questions in Bell Canada http://www.dslreports.com/forum/r22255760 en Tue, 08 Dec 2009 20:16:18 EDT Tue, 08 Dec 2009 20:16:18 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22435435 hogwild : Well, I can't explain it, but even 1 or 2 seconds after I flash the pwd., I still can't get in through Telnet. I've tried diff. passwords
and multiple times.

Perhaps there is some kind of bug? Can I assume that if 5200FTP is always accurate when it says the password was changed
successsfully?

HogWild]]> http://www.dslreports.com/forum/remark,22435435 Sun, 24 May 2009 00:24:11 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22433509 Doctor Olds : All I can say is that the program does work, but the settings change only lasts for a very short while so make your username and password very short/very easy to type. You have to be fast to get in. You can't wait or take your time typing in your commands. You should have the Telnet program ready to login so you have to only press enter.

»www.gabrielstrong.com/SpeedStrea···dme.html
quote:
The login/password will be reset automatically by the modem after a short while.

Tips:
1. Make sure the interface you select is the one that the modem is physically connected to.
2. Try to use an Ethernet card and not USB.
3. Shut down any programs that may be communicating with modem configurations, i.e. TangoManager, or any SNMP program.
4. Make sure to use the correct modem IP when connecting to the FTP.
5. Connect to the FTP immediately after setting the login as the login will expire after a short time.
6. Make sure to enter the MAC address in hexadecimal format, i.e. AA:FF:00:00:AA:88
7. When setting the login/password use a short one, i.e. 123/123

--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?]]> http://www.dslreports.com/forum/remark,22433509 Sat, 23 May 2009 14:32:15 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22426039 hogwild : Interestingly enough, the 5200FTP utility did not seem to work. Even though it confirmed changing of the pwd. to the one I
specified, when I tried logging in via Telnet using that password immediately afterwards, I was simply prompted again for another
username and pwd. I tried several times.

Anyone have any suggestions?

Thanks]]> http://www.dslreports.com/forum/remark,22426039 Thu, 21 May 2009 23:57:15 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22276522 Doctor Olds : It does both. It is for when Telnet/FTP works, but you don't know the UN/PW or it is for when you try Telnet/FTP and it returns cannot connect errors.

»A50 FW on 5200, no telnet or FTP !!!
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?]]> http://www.dslreports.com/forum/remark,22276522 Wed, 22 Apr 2009 00:13:18 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22276082 HiVolt :
said by Doctor Olds See Profile :

Certain what will work? The ICGabe Utility to open up Telnet/FTP for access? Yes, it works with all Speedstreams as far as I've seen.
Doesn't that utility simply allow for setting a temporary user/password to access telnet or ftp? The port has to be open in the firmware regardless, as far as I can remember.
--
GOLF LEAFS GOLF!]]> http://www.dslreports.com/forum/remark,22276082 Tue, 21 Apr 2009 22:54:42 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22262974 Doctor Olds : Certain what will work? The ICGabe Utility to open up Telnet/FTP for access? Yes, it works with all Speedstreams as far as I've seen.]]> http://www.dslreports.com/forum/remark,22262974 Sun, 19 Apr 2009 19:15:22 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22262718 hogwild : Thanks again, Doc.

You are certain it will work on my firmware on a 4200? I did some searching, but didn't see any indication of whether or not that's the case.

hogwild]]> http://www.dslreports.com/forum/remark,22262718 Sun, 19 Apr 2009 18:11:03 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22259090 hogwild : Heh heh. Never mind.

LOL

hogwild]]> http://www.dslreports.com/forum/remark,22259090 Sat, 18 Apr 2009 18:48:52 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22258606 Bicephale : Thank you, i knew you were the right guy to ask these questions! :)

I've just made a post over there in case you'd like to comment further:

Siemens SpeedStream 4200 FirmWare UpGrades, Bicephale, 2009-Apr-18]]> http://www.dslreports.com/forum/remark,22258606 Sat, 18 Apr 2009 16:34:42 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22258526 Doctor Olds :
said by hogwild See Profile :

"Now when you access this link you will be able to change ALL your settings on your modem."

I assumed that meant that all the menus (or at Menu Headings or categories) would display
in the left window pane of the web interface, without my having to create html files or similar
with links to pages other than what was being displayed. After the procedure, it displays:

Home
User Pages
Status and Statistics
Tools

(and all their nested menus)

Is that the typical result?
Yes, 100% normal. Not all pages will show up, but roughly 80% will become visible. You just have to direct access the other pages if you need them by pasting the link in your browser or saving them as bookmarks.
said by hogwild See Profile :

I CAN get into the other pages described by using the HTML links outside the modem
in html files), on this site etc. I was just hoping for
the former situation.

2. I cannot telnet into the modem, as suggested. When I try, I get error:
"C:\WINDOWS>telnet 192.168.2.1
Connecting To 192.168.2.1...Could not open connection to the host, on port 23: Connect failed"

Do I need to enable something in the modem, or ??

Thanks once more!

hogwild
You most likely will need to open the Telnet Server by using this utility that works on the 5200 and 4200.

»Efficient Networks Forum FAQ »How do I set/reset the 5200 FTP/Telnet Login and Password?

HTH
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?]]> http://www.dslreports.com/forum/remark,22258526 Sat, 18 Apr 2009 16:12:06 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22258461 Doctor Olds :
said by Bicephale See Profile :

Hi,

Mine is marked as D242 HardWare on the back but its FirmWare is D240!

I bought this Genuine (non-branded) unit from GenTek:


Where to buy a Siemens SS4200?, Bicephale, 2008-May-22
There are D240 and D241 Firmwares. Don't mix Part numbers with Firmware numbers and we are initially only talking about what Bell Canada supplied otherwise I can show my 4200 which is US based and has a D246 Part number......

System Type: SpeedStream 4200-Series

Modem Part #: 060R-D246-A12
Config. Part #: 003-6100-G0a
Firmware Part #: 004-D241-A0U
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?]]> http://www.dslreports.com/forum/remark,22258461 Sat, 18 Apr 2009 15:50:03 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22258159 Bicephale : I don't understand the question.]]> http://www.dslreports.com/forum/remark,22258159 Sat, 18 Apr 2009 14:12:49 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22258127 hogwild : bicephale:

Was that a hint?

hogwild]]> http://www.dslreports.com/forum/remark,22258127 Sat, 18 Apr 2009 14:04:59 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22257680 Bicephale : Doctor Olds is some notorious resource on the SpeedStream
around here. He's most likely the best user to ask questions
about this product but i can tell you the address i TelNet to
is 192.168.254.254 (using the genuine FirmWare/setup)...]]> http://www.dslreports.com/forum/remark,22257680 Sat, 18 Apr 2009 12:09:16 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22257608 hogwild : Thanks again.

Okay, a couple of questions.

1. I assumed that when the author who wrote the text in the post on Keyboard Ninjas wrote:

"Now when you access this link you will be able to change ALL your settings on your modem."

I assumed that meant that all the menus (or at Menu Headings or categories) would display
in the left window pane of the web interface, without my having to create html files or similar
with links to pages other than what was being displayed. After the procedure, it displays:

Home
User Pages
Status and Statistics
Tools

(and all their nested menus)

Is that the typical result?
I CAN get into the other pages described by using the HTML links outside the modem
in html files), on this site etc. I was just hoping for
the former situation.

2. I cannot telnet into the modem, as suggested. When I try, I get error:
"C:\WINDOWS>telnet 192.168.2.1
Connecting To 192.168.2.1...Could not open connection to the host, on port 23: Connect failed"

Do I need to enable something in the modem, or ??

Thanks once more!

hogwild]]> http://www.dslreports.com/forum/remark,22257608 Sat, 18 Apr 2009 11:48:05 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22257594 Bicephale : Hi,

Mine is marked as D242 HardWare on the back but its FirmWare is D240!

I bought this Genuine (non-branded) unit from GenTek:


Where to buy a Siemens SS4200?, Bicephale, 2008-May-22

Siemens SS4200 PN 060-D242-A65 with 004-D240-A7S FirmWare
]]> http://www.dslreports.com/forum/remark,22257594 Sat, 18 Apr 2009 11:44:12 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22257419 Doctor Olds :
said by Harleyguy See Profile :

The document I have says "There is no firmware upgrade available for the 4200 "
Does not mean that a future release might become available and delivered over night using the enabled by default CWMP agent.

Note: Don't know what document that you have, but I do know there are two 4200 designs (early revision D240 and later revision D242) and each uses a different Firmware that isn't swappable between versions.

Sympatico updated one of their 4200s at least 3 times with the CWMP agent and that shows there were different Bell Canada/Sympatico specific 4200 Firmwares at one time.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?]]> http://www.dslreports.com/forum/remark,22257419 Sat, 18 Apr 2009 11:00:19 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22256334 Harleyguy :
said by hogwild See Profile :

Thanks for that-it worked. Just what the "Dr." ordered.

A couple of follow-up questions. Will this config. stick after a factory defaults reset? I'm guessing not...

Second, Can Bell upgrade the firmware now? I've called, and was told they no longer try to update 4200 modems online,
but I just assumed they could be wrong/lying and that it was automated and could still happen.

Anyone know?

hogwild
The document I have says "There is no firmware upgrade available for the 4200 "]]> http://www.dslreports.com/forum/remark,22256334 Sat, 18 Apr 2009 00:30:29 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22256313 Doctor Olds : First Answer is Yes it loses the changes after a reset, of course. Save the instructions to your HDD or print out to file away.

Second Answer, I Don't Know. However, you can simply disable that ability (that stops them dead) by stopping the CWMP agent.

Disabling the CWMP agent from CLI
»shadow.sentry.org/~trev/adsl4200···fig.html

HTH
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?]]> http://www.dslreports.com/forum/remark,22256313 Sat, 18 Apr 2009 00:21:47 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22256090 hogwild : Thanks for that-it worked. Just what the "Dr." ordered.

A couple of follow-up questions. Will this config. stick after a factory defaults reset? I'm guessing not...

Second, Can Bell upgrade the firmware now? I've called, and was told they no longer try to update 4200 modems online,
but I just assumed they could be wrong/lying and that it was automated and could still happen.

Anyone know?

hogwild]]> http://www.dslreports.com/forum/remark,22256090 Fri, 17 Apr 2009 23:22:49 EDT Re: Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22255948 Doctor Olds :


The very first link Google finds using the Part Number is....................

»www.keyboardninjas.com/smf/index···pic=68.0
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time?]]> http://www.dslreports.com/forum/remark,22255948 Fri, 17 Apr 2009 22:42:15 EDT Bell Speedstream 4200 unlock/flash questions http://www.dslreports.com/forum/remark,22255760 hogwild : Hi everyone:

I have here a Speedstream 4200 from Bell. I have read through (quite) a few
of the unlocking and flashing instructions, and I'm not sure which is the best way for me to go.
I see a lot of clear info. on unlocking the 5200 but not so much the 4200.
Please forgive me if my searches missed it.

First of all, I'm confused when trying to identify which modem I have. THE MODEM LABEL reads:
"Part number: 060-D242-A58"
"IC: 267AJ-D242A58".

However, in the web interface, it reads:
"Config Part. No 003-y093-G05"
"004-D240-A3S".

Does this mean I have a D240 or D242?

I would like to config. the modem so that all menus possible will show, and I would like to access said menus
without having to resort to having an html links sheet available.
Do I need to flash, or can the all this be done simply by unlocking?

I am quite comfortable with either, though I could use instructions.

Thanks very much in advance

hogwild]]> http://www.dslreports.com/forum/remark,22255760 Fri, 17 Apr 2009 21:49:48 EDT