republican-creole
Search:  

 
theme to black backgroundlet page decide theme
HomeFind ServiceReviewsISP NewsFAQsForumsToolsDatabaseAbout 
 
   All ForumsHot TopicsGallery






how-to block ads


 
Forums » Tech and Talk » Technical » Overclocking/Modding » E8400 @ 3.6 Ghz. Core Voltage
Search Topic:
Uniqs:
859		 Share Topic:
RSS topic:
toggle:
flat / full
normal / watch
Posting:
Post a:
Post a:
Links: ·New Overclockers ·Posting Rules ·Overclocking FAQ's ·AMD64 OC'ing Guide ·Temp Converter ·Online Stores
AuthorAll Replies


howie
Premium,MVM
join:2003-04-08
Little Falls, NJ

E8400 @ 3.6 Ghz. Core Voltage

I recently built a new E8400/P5Q system and am overclocking it to 3.6 Ghz. I did this by bumping the FSB to 400Mhz (9X multiplier). I was wondering what a stable core voltage for this speed is. I manually set it to 1.24 volts. Is this OK? Thanks for any replies!
to forum · permalink · · 2009-04-19 23:22:42 · Reply to this


poppster
Tell the truth and then run.
Premium
join:2003-12-23
Midwest
clubs:
said by howie See Profile :

I recently built a new E8400/P5Q system and am overclocking it to 3.6 Ghz. I did this by bumping the FSB to 400Mhz (9X multiplier). I was wondering what a stable core voltage for this speed is. I manually set it to 1.24 volts. Is this OK? Thanks for any replies!
What are your temps? Usually increasing the voltage will produce more heat, but if it's a minor jump, I wouldn't worry about it.
to forum · permalink · · 2009-04-20 20:12:47 · Reply to this


CCat
Purrplexity
Premium
join:2005-12-06
Wonderland
·RoadRunner Cable
·WOW Internet and C..

reply to howie
IIRC I had mine running at 4GHz with voltage about 1.325.
FSB 445 with 9X multiplier. Scythe Ninja cooler.
Would run 59C - 61C under 100% Prime

Like poppster See Profile said just keep an eye on your temps.

--
Sometimes My Mind Wanders.....Other Times It Leaves Completely!
to forum · permalink · · 2009-04-20 20:34:03 · Reply to this


howie
Premium,MVM
join:2003-04-08
Little Falls, NJ		reply to howie
Thanks for the replies. Everything is running fine with CPU temps @ 35-38C idle and low 50's maximum under load. I'm using an AC Freezer 7 Pro. I think I'll just leave it where it is.
to forum · permalink · · 2009-04-20 22:16:24 · Reply to this


psitool
Beware ManBearPig
Premium
join:2002-11-28
Albany, Ga		reply to howie
It should be able to run 3.6ghz with stock voltage. I've had my e8400 as high as 4.3ghz with only 1.36v.

It will be ok if you want to leave it where it is. 1.24v is far from hurting anything.
--
The cake is a lie.
to forum · permalink · · 2009-04-21 16:33:05 · Reply to this
-
Forums » Tech and Talk » Technical » Overclocking/Modding

Monday, 09-Nov 02:50:41 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 10 years online! © 1999-2009 dslreports.com.
page compression OFF
Most commented news this week
· [156] Cable Uncapper Faces Criminal Charges
· [140] AT&T Sues Verizon Over 3G Ads
· [112] Why Run Fiber When You Can Run Ads That Pretend You Do?
· [109] Comcast Is Simply Getting Huge
· [93] Apple Cooking Up New $30 A Month TV Service?
· [83] Bits Of ACTA Agreement Leaking Out
· [80] Will 'Three Strikes' Come To The United States?
· [78] Verizon To Double Smartphone ETFs?
· [77] Verizon: Droid Tethering Will Cost $30 Extra
· [73] Comcast, NBC Deal Almost Complete
Most people now reading
· 3.x Feral Druid - Bear Tanking Guide [World of Warcraft]
· Garbage Disposal and Dishwasher [Home Repair & Improvement]
· My cat is reluctant to exercise. [General Questions]
· [Rant] Brand New 'Jasper' Xbox360 - RRoD Hardware Failure [Rants, Raves, and Praise]
· [How to] Install Asterisk on an Asus WL-520GU router [VOIP Tech Chat]
· Divorce advice... [General Questions]
· Maximizing Rogue DPS for 3.1 [World of Warcraft]
· [LA] Will we have the highest HSI bill? [Cox HSI]
· Is Gear Score now the new requirement to get pug invite? [World of Warcraft]