http://www.dslreports.com/forum/DIR655-Virtual-Server-broadcast-address-in-131-22315056 en Sat, 11 Feb 2012 01:42:54 EDT Sat, 11 Feb 2012 01:42:54 EDT http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22841740 Maybe it's a little bit late to reply, here's my 2 cents for this problem.
I am using firmware 1.21 and the javascript at Virtual Server page do not allow me to save the boardcasting IP 192.168.0.255 for wake on lan.
I know that I could change the subnet mask to make it work for IP like 192.168.0.127, however, that would make me need to change a lot of assigned IP in my network. I still want to boardcast at IP 192.168.0.255.

My work around is like this:
1. Login the router and go to Virtual Server page.
2. Just fill the table with port 9 and route to IP 192.168.0.255 and check the box for activation.
3. If you press Save settings now, you will get an error.
4. What I do is type "javascript:mf.submit()" at the address bar.
5. This will bypass the checking function of javascript and directly save the form.
6. Now the settings should be saved and working.]]> http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22841740 Sun, 09 Aug 2009 22:48:19 EDT http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22417941
So pc turns on by itself when I enter the office?

I have the DIR -655 so not sure how to use the virutal server if I ever wanted to use it.]]> http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22417941 Wed, 20 May 2009 15:29:05 EDT http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22403893 »www.smallnetbuilder.com/content/···9941/53/

On the DIR-655 setup page, go to the Advanced page. You'll need to add an entry for WOL on the Virtual Servers list. Use port number 9, protocol UDP, and set the host to be your lan's broadcast address. This would depend on the subnet netmask you are using.

Post your router ip address and subnet mask and what version ROM you are using for the DIR-655.]]> http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22403893 Sun, 17 May 2009 22:29:56 EDT http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22392250
The router is a DIR-655 and the clients are two laptops and one desktop. All are wake on LAN capable, so they claim.

AKA Rumple ;)]]> http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22392250 Fri, 15 May 2009 00:40:12 EDT http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22391998 said by HolmanGT:

Jeffro7,
...I will either spin your straw into gold or take your first born male child.
funny, Rumplestiltskin is my kids' favorite bedtime story!

we can help you set it up if you describe your LAN. what router do you have and what client are you trying to wake up?]]> http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22391998 Thu, 14 May 2009 23:31:56 EDT http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22368944 http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22368944 Sun, 10 May 2009 21:23:41 EDT http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22367609
I know this is asking a lot but if you have detailed instruction on how to set things up and do the wake on lan I will either spin your straw into gold or take your first born male child.

That sounds absolutely cool and is something I have wanted to do for a long time. But even commercial programs that claim they do wake on lan packet transmissions have not worked worth a Poo!

Regards,
Rumpelstiltskin (so you can keep your child :uhh: )]]> http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22367609 Sun, 10 May 2009 15:04:53 EDT http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22364468
Seems as though it won't let you broadcast over the lan using the typical broadcast address in the virtual server but it does let you if you change your subnet to 255.255.255.128 and then use 192.168.0.127 as the broadcast address.

Good Luck.]]> http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22364468 Sat, 09 May 2009 17:30:25 EDT http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22321092 http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22321092 Thu, 30 Apr 2009 20:01:46 EDT http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22318055
thanks!]]> http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22318055 Thu, 30 Apr 2009 10:08:28 EDT http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22315305 http://www.dslreports.com/forum/Re-DIR655-Virtual-Server-broadcast-address-in-131-22315305 Wed, 29 Apr 2009 18:24:55 EDT http://www.dslreports.com/forum/DIR655-Virtual-Server-broadcast-address-in-131-22315056 forums.dlink.com/index.php?topic=2849.0

Can anyone who has upgraded to 1.31 tell me if they have fixed this?

Also does the 30/30/30 routine allow you to downgrade from 1.3x?

thanks!]]> http://www.dslreports.com/forum/DIR655-Virtual-Server-broadcast-address-in-131-22315056 Wed, 29 Apr 2009 17:34:39 EDT