 tom7
@optusnet.com.au | Speedstream 4200----How do i change my IP hey guys,
i'm on a local network with 3 other computers and we wanted to change our IP address. How do we go about this?
i've tried turning off the router for 10 min, and then on again.
cheers |
|
KGB7
join:2003-12-17
Rockville, MD
1 edit | You can manually assign IP to all computers.
Go in to Network adapter properties, select Internet Protocol (TCP/IP), Properties, and from there you manually assign IP on each PC.
»www.home-network-help.com/set-ip.html |
|
 McSummationMmmm, Zeebas Are Tastee.Premium,MVM
join:2003-08-13
Round Rock, TX
kudos:2 | reply to tom7
Do you mean the public IP? |
|
 Doctor OldsI Need A Remedy For What's Ailing Me.Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18 | reply to tom7
said by tom7 :
i'm on a local network with 3 other computers and we wanted to change our IP address. How do we go about this?
i've tried turning off the router for 10 min, and then on again. What Brand and Model Number Router?
What Mode is the 4200 unit set in? Bridged Mode or Router Mode?
What IP Address are you wanting to change? The LAN? The WAN? and on which device?
If the 4200 is in Router Mode and getting your Public WAN IP, turning off the Router behind the 4200 will not change the WAN IP being used in the 4200.
--
What’s the point of owning a supercar if you can’t scare yourself stupid from time to time? |
|
tom7
@optusnet.com.au | D-Link DI-524
the 4200 is in bridged mode (optus bridge), it's a seamens
wanted to change the WAN
how do i do it? |
|
McSummationMmmm, Zeebas Are Tastee.Premium,MVM
join:2003-08-13
Round Rock, TX
kudos:2 | Did you try doing a "release", then "renew" to the WAN IP? This is done in the WAN portion of the Status tab. |
|
